Re: [PATCH v5 05/10] iio: accel: adxl345: complete list of defines

[Jonathan Cameron]

On Thu,  5 Dec 2024 17:13:38 +0000
Lothar Rubusch <l.rubusch@xxxxxxxxx> wrote:

> Extend the list of constants. Keep them the header file for readability.
> The defines allow the implementation of events like watermark, single
> tap, double tap, freefall, etc.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
> ---
>  drivers/iio/accel/adxl345.h | 89 ++++++++++++++++++++++++++++++++-----
>  1 file changed, 77 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
> index 3d5c8719db3..ed81d5cf445 100644
> --- a/drivers/iio/accel/adxl345.h
> +++ b/drivers/iio/accel/adxl345.h
> @@ -9,37 +9,102 @@
>  #define _ADXL345_H_
>  
>  #define ADXL345_REG_DEVID		0x00
> +#define ADXL345_REG_THRESH_TAP	0x1D
>  #define ADXL345_REG_OFSX		0x1E
>  #define ADXL345_REG_OFSY		0x1F
>  #define ADXL345_REG_OFSZ		0x20
> -#define ADXL345_REG_OFS_AXIS(index)	(ADXL345_REG_OFSX + (index))
> +/* Tap duration */
> +#define ADXL345_REG_DUR		0x21
> +/* Tap latency */
> +#define ADXL345_REG_LATENT		0x22
> +/* Tap window */
> +#define ADXL345_REG_WINDOW		0x23
> +/* Activity threshold */
> +#define ADXL345_REG_THRESH_ACT		0x24
> +/* Inactivity threshold */
> +#define ADXL345_REG_THRESH_INACT	0x25
> +/* Inactivity time */
> +#define ADXL345_REG_TIME_INACT	0x26
> +/* Axis enable control for activity and inactivity detection */
> +#define ADXL345_REG_ACT_INACT_CTRL	0x27
> +/* Free-fall threshold */
> +#define ADXL345_REG_THRESH_FF		0x28
> +/* Free-fall time */
> +#define ADXL345_REG_TIME_FF		0x29
> +/* Axis control for single tap or double tap */
> +#define ADXL345_REG_TAP_AXIS		0x2A
> +/* Source of single tap or double tap */
> +#define ADXL345_REG_ACT_TAP_STATUS	0x2B
> +/* Data rate and power mode control */
>  #define ADXL345_REG_BW_RATE		0x2C
>  #define ADXL345_REG_POWER_CTL		0x2D
> +#define ADXL345_REG_INT_ENABLE		0x2E
> +#define ADXL345_REG_INT_MAP		0x2F
> +#define ADXL345_REG_INT_SOURCE		0x30
>  #define ADXL345_REG_DATA_FORMAT		0x31
> -#define ADXL345_REG_DATAX0		0x32
> -#define ADXL345_REG_DATAY0		0x34
> -#define ADXL345_REG_DATAZ0		0x36
> -#define ADXL345_REG_DATA_AXIS(index)	\
> -	(ADXL345_REG_DATAX0 + (index) * sizeof(__le16))
> +#define ADXL345_REG_XYZ_BASE		0x32
> +#define ADXL345_REG_DATA_AXIS(index)				\
> +	(ADXL345_REG_XYZ_BASE + (index) * sizeof(__le16))
> +
> +#define ADXL345_REG_FIFO_CTL		0x38
> +#define ADXL345_REG_FIFO_STATUS		0x39
> +
> +#define ADXL345_DEVID			0xE5
> +
> +#define ADXL345_FIFO_CTL_SAMLPES(x)	(0x1f & (x))

SAMPLES?

> +#define ADXL345_FIFO_CTL_TRIGGER(x)	(0x20 & ((x) << 5)) /* 0: INT1, 1: INT2 */
> +#define ADXL345_FIFO_CTL_MODE(x)	(0xc0 & ((x) << 6))

Supply the mask only and use FIELD_PREP() for these.


>  
> +#define ADXL345_INT_DATA_READY		BIT(7)
> +#define ADXL345_INT_SINGLE_TAP		BIT(6)
> +#define ADXL345_INT_DOUBLE_TAP		BIT(5)
> +#define ADXL345_INT_ACTIVITY		BIT(4)
> +#define ADXL345_INT_INACTIVITY		BIT(3)
> +#define ADXL345_INT_FREE_FALL		BIT(2)
> +#define ADXL345_INT_WATERMARK		BIT(1)
> +#define ADXL345_INT_OVERRUN		BIT(0)
> +
> +#define ADXL345_S_TAP_MSK	ADXL345_INT_SINGLE_TAP
> +#define ADXL345_D_TAP_MSK	ADXL345_INT_DOUBLE_TAP
> +
> +#define ADXL345_INT1			0
> +#define ADXL345_INT2			1
> +
> +/*
> + * BW_RATE bits - Bandwidth and output data rate. The default value is
> + * 0x0A, which translates to a 100 Hz output data rate
> + */
>  #define ADXL345_BW_RATE			GENMASK(3, 0)
> +#define ADXL345_BW_LOW_POWER	BIT(4)
>  #define ADXL345_BASE_RATE_NANO_HZ	97656250LL
>  
> -#define ADXL345_POWER_CTL_MEASURE	BIT(3)
>  #define ADXL345_POWER_CTL_STANDBY	0x00
> +#define ADXL345_POWER_CTL_WAKEUP	GENMASK(1, 0)
> +#define ADXL345_POWER_CTL_SLEEP	BIT(2)
> +#define ADXL345_POWER_CTL_MEASURE	BIT(3)
> +#define ADXL345_POWER_CTL_AUTO_SLEEP	BIT(4)
> +#define ADXL345_POWER_CTL_LINK	BIT(5)
>  
>  #define ADXL345_DATA_FORMAT_RANGE	GENMASK(1, 0)	/* Set the g range */
> -#define ADXL345_DATA_FORMAT_JUSTIFY	BIT(2)	/* Left-justified (MSB) mode */
> +#define ADXL345_DATA_FORMAT_IS_LEFT_JUSTIFIED	BIT(2)
>  #define ADXL345_DATA_FORMAT_FULL_RES	BIT(3)	/* Up to 13-bits resolution */
> -#define ADXL345_DATA_FORMAT_SPI_3WIRE	BIT(6)	/* 3-wire SPI mode */
> -#define ADXL345_DATA_FORMAT_SELF_TEST	BIT(7)	/* Enable a self test */
> -
> +#define ADXL345_DATA_FORMAT_SPI_3WIRE	BIT(6)
> +#define ADXL345_DATA_FORMAT_SELF_TEST	BIT(7)
>  #define ADXL345_DATA_FORMAT_2G		0
>  #define ADXL345_DATA_FORMAT_4G		1
>  #define ADXL345_DATA_FORMAT_8G		2
>  #define ADXL345_DATA_FORMAT_16G		3
>  
> -#define ADXL345_DEVID			0xE5
> +#define ADXL345_REG_OFS_AXIS(index)	(ADXL345_REG_OFSX + (index))
I'm not sure on logic of moving this to the end. Seems fine next
to the definitions of the individual axis to me.

> +
> +/*
> + * FIFO stores a maximum of 32 entries, which equates to a maximum of 33 entries
> + * available at any given time because an additional entry is available at the
> + * output filter of the device.
> + *
> + * (see datasheet FIFO_STATUS description on "Entries Bits")
> + */
> +#define ADXL345_FIFO_SIZE  33
>  
>  /*
>   * In full-resolution mode, scale factor is maintained at ~4 mg/LSB