[PATCH 0/2] Some small preparations around CAMSS D-PHY / C-PHY support

[Luca Weiss]

Since the hardware blocks on the SoCs generally support both D-PHY and
C-PHY standards for camera, but the camss driver currently is only
supporting D-PHY, do some preparations in order to add C-PHY support at
some point.

Make the dt bindings explicit that the hardware supports both (except
for MSM8916) but also add a check to the driver that errors out in case
a dt tries to use C-PHY since that's not supported yet.

Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
Luca Weiss (2):
      media: dt-bindings: media: camss: Restrict bus-type property
      media: qcom: camss: Restrict endpoint bus-type to D-PHY

 .../bindings/media/qcom,msm8916-camss.yaml         |  8 ++++++
 .../bindings/media/qcom,msm8953-camss.yaml         | 15 +++++++++++
 .../bindings/media/qcom,msm8996-camss.yaml         | 20 +++++++++++++++
 .../bindings/media/qcom,sc8280xp-camss.yaml        | 20 +++++++++++++++
 .../bindings/media/qcom,sdm660-camss.yaml          | 20 +++++++++++++++
 .../bindings/media/qcom,sdm845-camss.yaml          | 20 +++++++++++++++
 .../bindings/media/qcom,sm8250-camss.yaml          | 30 ++++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss.c          |  9 +++++++
 8 files changed, 142 insertions(+)
---
base-commit: fac04efc5c793dccbd07e2d59af9f90b7fc0dca4
change-id: 20241209-camss-dphy-8bf46e251291

Best regards,
-- 
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>