Re: [PATCH v2 1/1] dt-bindings: PCI: mobiveil: convert mobiveil-pcie.txt to yaml format

[Frank Li]

On Tue, Dec 10, 2024 at 09:52:47AM +0100, Krzysztof Kozlowski wrote:
> On Fri, Dec 06, 2024 at 05:25:27PM -0500, Frank Li wrote:
> > Convert device tree binding doc mobiveil-pcie.txt to yaml format. Merge
> > layerscape-pcie-gen4.txt into this file.
> >
> > Additional change:
> > - interrupt-names: "aer", "pme", "intr", which align order in examples.
> > - reg-names: csr_axi_slave, config_axi_slave, which align existed dts file.
>
> mobiveil-pcie.txt binding suggested reversed orders of above, so please
> mention that you unify the order to match layerscape-pcie-gen4 and
> existing Layerscape DTS users.
>
>
> ...
>
>
> > +++ b/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml
> > @@ -0,0 +1,167 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/mbvl,gpex40-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mobiveil AXI PCIe Root Port Bridge
> > +
> > +maintainers:
> > +  - Frank Li <Frank Li@xxxxxxx>
> > +
> > +description:
> > +  Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
> > +  has up to 8 outbound and inbound windows for the address translation.
> > +
> > +  NXP Layerscape PCIe Gen4 controller (Deprecated) base on Mobiveil's GPEX 4.0.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - mbvl,gpex40-pcie
> > +      - fsl,lx2160a-pcie
>
> Please reverse them to keep alphabetical order.
>
> > +
> > +  reg:
> > +    items:
> > +      - description: PCIe controller registers
> > +      - description: Bridge config registers
> > +      - description: GPIO registers to control slot power
> > +      - description: MSI registers
> > +    minItems: 2
> > +
> > +  reg-names:
> > +    items:
> > +      - const: csr_axi_slave
> > +      - const: config_axi_slave
> > +      - const: gpio_slave
> > +      - const: apb_csr
> > +    minItems: 2
> > +
> > +  apio-wins:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: |
> > +      numbers of requested apio outbound windows
> > +        1. Config window
> > +        2. Memory window
> > +    default: 2
> > +    maximum: 256
> > +
> > +  ppio-wins:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: number of requested ppio inbound windows
> > +    default: 1
> > +    maximum: 256
> > +
> > +  interrupt-controller: true
> > +
> > +  "#interrupt-cells":
> > +    const: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 3
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 3
> > +
> > +  dma-coherent: true
> > +
> > +  msi-parent: true
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/pci-host-bridge.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,lx2160a-pcie
> > +    then:
> > +      properties:
> > +        reg:
> > +          maxItems: 2
> > +
> > +        reg-names:
> > +          maxItems: 2
> > +
>
> interrupts:
>   minItems: 3
>
> > +        interrupt-names:
> > +          items:
> > +            - const: aer
> > +            - const: pme
> > +            - const: intr
> > +    else:
> > +      properties:
> > +        dma-coherent: false
> > +        msi-parent: false
>
> reg? interrupts? interrupt-names?

mbvl,gpex40-pcie text file descript reg as

Mandatory:
  "config_axi_slave": PCIe controller registers
  "csr_axi_slave"	  : Bridge config registers
Optional:
  "gpio_slave"	  : GPIO registers to control slot power
  "apb_csr"	  : MSI registers

reg have set minItems 2 and maxItems 4 at top. So needn't set it again.

I will add interrupts and interrupt-names.

Frank

>
>
>
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    pcie@b0000000 {
> > +        compatible = "mbvl,gpex40-pcie";
> > +        reg = <0xb0000000 0x00010000>,
> > +              <0xa0000000 0x00001000>,
> > +              <0xff000000 0x00200000>,
> > +              <0xb0010000 0x00001000>;
> > +        reg-names = "csr_axi_slave",
> > +                    "config_axi_slave",
> > +                    "gpio_slave",
> > +                    "apb_csr";
> > +        #address-cells = <3>;
> > +        #size-cells = <2>;
> > +        device_type = "pci";
> > +        apio-wins = <2>;
> > +        ppio-wins = <1>;
> > +        bus-range = <0x00000000 0x000000ff>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <1>;
> > +        interrupt-parent = <&gic>;
> > +        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-map-mask = <0 0 0 7>;
> > +        interrupt-map = <0 0 0 0 &pci_express 0>,
> > +                        <0 0 0 1 &pci_express 1>,
> > +                        <0 0 0 2 &pci_express 2>,
> > +                        <0 0 0 3 &pci_express 3>;
> > +        ranges = <0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
>
> Please keep ranges after reg-names
>
> > +    };
> > +
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +        pcie@3400000 {
> > +            compatible = "fsl,lx2160a-pcie";
> > +            reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
> > +                   0x80 0x00000000 0x0 0x00001000>; /* configuration space */
> > +            reg-names = "csr_axi_slave", "config_axi_slave";
> > +            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                         <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                        <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +            interrupt-names = "aer", "pme", "intr";
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            device_type = "pci";
> > +            apio-wins = <8>;
> > +            ppio-wins = <8>;
> > +            dma-coherent;
> > +            bus-range = <0x0 0xff>;
> > +            msi-parent = <&its>;
> > +            ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
>
> Ditto here
>
> > +            #interrupt-cells = <1>;
> > +            interrupt-map-mask = <0 0 0 7>;
> > +            interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> > +        };
>
> Best regards,
> Krzysztof
>