Re: [PATCH 0/6] Correct the number of GPIOs in gpio-ranges for QCS615 and QCS8300

[Dmitry Baryshkov]

On Thu, Dec 12, 2024 at 05:23:59PM +0800, Lijuan Gao wrote:
> The UFS_RESET pin is expected to be wired to the reset pin of the
> primary UFS memory, it's a general purpose output pin. Reorder it and
> expose it as a gpio, so that the UFS driver can toggle it.

I don't see pins being reordered. Please correct your commit messages.

> 
> The QCS615 TLMM pin controller has GPIOs 0-122, so correct the
> gpio-rangs to 124.
> 
> The QCS8300 TLMM pin controller has GPIOs 0-132, so correct the
> gpio-rangs to 134.
> 
> Signed-off-by: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
> ---
> Lijuan Gao (6):
>       dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
>       dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
>       pinctrl: qcom: correct the number of ngpios for QCS615
>       pinctrl: qcom: correct the number of ngpios for QCS8300
>       arm64: dts: qcom: correct gpio-ranges for QCS615
>       arm64: dts: qcom: correct gpio-ranges for QCS8300
> 
>  Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml  | 2 +-
>  Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml | 2 +-
>  arch/arm64/boot/dts/qcom/qcs615.dtsi                             | 2 +-
>  arch/arm64/boot/dts/qcom/qcs8300.dtsi                            | 2 +-
>  drivers/pinctrl/qcom/pinctrl-qcs615.c                            | 2 +-
>  drivers/pinctrl/qcom/pinctrl-qcs8300.c                           | 2 +-
>  6 files changed, 6 insertions(+), 6 deletions(-)
> ---
> base-commit: 91e71d606356e50f238d7a87aacdee4abc427f07
> change-id: 20241211-correct_gpio_ranges-ed8a25ad22e7
> 
> Best regards,
> -- 
> Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
> 

-- 
With best wishes
Dmitry