Re: [PATCH v3 0/6] Introduce ASPEED AST27XX BMC SoC

[Andrew Jeffery]

Hi Kevin,

On Thu, 2024-12-12 at 23:52 +0800, Kevin Chen wrote:
> ---
> v3:
>   - Split clk and reset driver to other commits, which are in series
> of
>     "Add support for AST2700 clk driver".
>   - For BMC console by UART12, add uart12 using ASPEED INTC
> architecture.
> 
> aspeed,ast2700-intc.yaml
>   - Add minItems to 1 to fix the warning by "make dtbs_check W=1".
>   - Add intc1 into example.
> 
> Kconfig.platforms
>   - Remove MACH_ASPEED_G7.
> 
> Kevin Chen (6):
>   dt-bindings: interrupt-controller: Refine size/interrupt-cell
> usage.
>   dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
>   arm64: aspeed: Add support for ASPEED AST27XX BMC SoC
>   arm64: dts: aspeed: Add initial AST27XX device tree
>   arm64: dts: aspeed: Add initial AST2700 EVB device tree
>   arm64: defconfig: Add ASPEED AST2700 family support

Do you mind sending a v4, because I received a confusing arrangement of
patches:

[PATCH v3 1/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
[PATCH v3 1/6] dt-bindings: interrupt-controller: Refine size/interrupt-cell usage.
[PATCH v3 2/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
[PATCH v3 2/6] dt-bindings: interrupt-controller: Fix the size-cells in ast2700-intc
...

Where the content of 

   [PATCH v3 1/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
   
and

   [PATCH v3 2/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
   
Differs, as does the content of

   [PATCH v3 1/6] dt-bindings: interrupt-controller: Refine size/interrupt-cell usage.
   
and

   [PATCH v3 2/6] dt-bindings: interrupt-controller: Fix the size-cells in ast2700-intc

Despite sounding like they might have the same intent

Andrew