Re: [PATCH 3/3] arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

[Dmitry Baryshkov]

On Sat, Dec 14, 2024 at 10:48:28PM +0800, Pengyu Luo wrote:
> On Sat, Dec 14, 2024 at 9:39 PM Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> wrote:
> 
> > On Sat, Dec 14, 2024 at 08:23:00PM +0800, Pengyu Luo wrote:
> >> On Fri, Dec 13, 2024 at 1:13 AM Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx> wrote:
> >>
> >> [...]
> >>
> >> >> +
> >> >> +          /* /lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin
> >> >> +           * there is no calibrate data for huawei,
> >> >> +           * but they have the same subsystem-device id
> >> >> +           */
> >> >> +          qcom,ath11k-calibration-variant = "LE_X13S";
> >> >
> >> > Oh, this can be taken care of! See [2], [3].
> >>
> >> [...]
> >>
> >> Hi, Konrad
> >>
> >> I want to distrub you again.
> >>
> >> Finally, I found something, after I enabled ath11k boot dbg, I got my
> >> id_string='bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=255`
> >>
> >> With qca-swiss-army-knife (see [1])
> >>
> >> $ ./ath11k-bdencoder -e board-2.bin | grep -i "$id_string"
> >> bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=255.bin created size: 60048
> >>
> >> It have already been here. So that means I don't need to extract from
> >> Windows. I just extract it from linux-firmware then give it a variant
> >> name and send patches to ath11k, right?
> > 
> > No. Usually 255 is an ID that is used by a variety of boards. So,
> > basically, you have to extract board data from Windows, add a proper
> > calibration variant that is specific to your board and then send the
> > resulting data to the ath11k mailing list.
> > 
> 
> But how? Is it possible that some boards have no  calibration data?
> I tried to track the access time of files, the result shows that these
> bdwlan* are never touched. According to my observation, these files
> should have been accessed, (like BT firmware on windows).

On Windows? Unfortunately I have no idea :-( Please try asking on the
ath11k mailing list.

> 
> >>
> >> Pengyu
> >>
> >> [1] https://github.com/qca/qca-swiss-army-knife
> >
> > --
> > With best wishes
> > Dmitry
> 
> 
> Pengyu

-- 
With best wishes
Dmitry