[PATCH v2 0/4] RTL9300 MDIO driver

[Chris Packham]

This series adds a driver for the MDIO controller on the RTL9300 family
of devices. The controller is a little unique in that we can't access
the SMI interfaces directly. Instead we associate the SMI interface with
a switch port and use the port number to address the SMI bus in
software.

Chris Packham (4):
  dt-bindings: net: Add Realtek MDIO controller
  dt-bindings: mfd: Add MDIO interface to rtl9301-switch
  mips: dts: realtek: Add MDIO controller
  net: mdio: Add RTL9300 MDIO driver

 .../bindings/mfd/realtek,rtl9301-switch.yaml  |  15 +
 .../bindings/net/realtek,rtl9301-mdio.yaml    |  82 +++++
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |   8 +
 drivers/net/mdio/Kconfig                      |   7 +
 drivers/net/mdio/Makefile                     |   1 +
 drivers/net/mdio/mdio-realtek-rtl.c           | 341 ++++++++++++++++++
 6 files changed, 454 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml
 create mode 100644 drivers/net/mdio/mdio-realtek-rtl.c

-- 
2.47.1