Re: [PATCH v4 3/4] arm64: dts: qcom: add venus node for the qcs615

[Bjorn Andersson]

On Fri, Dec 13, 2024 at 03:26:48PM +0530, Renjiang Han wrote:

Subject should be prefixed per the file being changed, i.e:
"arm64: dts: qcom: qcs615: Add Venus"

> Add venus node into devicetree for the qcs615 video and fallback
> qcs615 to sc7180 due to the same video core.
> 
> Signed-off-by: Renjiang Han <quic_renjiang@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs615.dtsi | 86 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> index 37a189e0834d2f4b75ed9deb6fff73da163cb3a3..c08da80c7fd8fa8c69aff04b14784b821ce3ea13 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> @@ -427,6 +427,11 @@ smem_region: smem@86000000 {
>  			no-map;
>  			hwlocks = <&tcsr_mutex 3>;
>  		};
> +
> +		pil_video_mem: pil-video@93400000 {
> +			reg = <0x0 0x93400000 0x0 0x500000>;
> +			no-map;
> +		};
>  	};
>  
>  	soc: soc@0 {
> @@ -2806,6 +2811,87 @@ gem_noc: interconnect@9680000 {
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> +		venus: video-codec@aa00000 {
> +			compatible = "qcom,qcs615-venus", "qcom,sc7180-venus";
> +			reg = <0x0 0x0aa00000 0x0 0x100000>;
> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> +				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> +				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> +				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
> +				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
> +			clock-names = "core",
> +				      "iface",
> +				      "bus",
> +				      "vcodec0_core",
> +				      "vcodec0_bus";
> +
> +			power-domains = <&videocc VENUS_GDSC>,
> +					<&videocc VCODEC0_GDSC>,
> +					<&rpmhpd RPMHPD_CX>;
> +			power-domain-names = "venus",
> +					     "vcodec0",
> +					     "cx";
> +
> +			operating-points-v2 = <&venus_opp_table>;
> +
> +			interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>;
> +			interconnect-names = "video-mem",
> +					     "cpu-cfg";
> +
> +			iommus = <&apps_smmu 0xe40 0x20>;
> +
> +			memory-region = <&pil_video_mem>;
> +
> +			status = "disabled";
> +
> +			video-decoder {
> +				compatible = "venus-decoder";
> +			};
> +
> +			video-encoder {
> +				compatible = "venus-encoder";
> +			};
> +
> +			venus_opp_table: opp-table {

'o' < 'v', so this should come above video-decoder.

Regards,
Bjorn

> +				compatible = "operating-points-v2";
> +
> +				opp-133330000 {
> +					opp-hz = /bits/ 64 <133330000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +
> +				opp-240000000 {
> +					opp-hz = /bits/ 64 <240000000>;
> +					required-opps = <&rpmhpd_opp_svs>;
> +				};
> +
> +				opp-300000000 {
> +					opp-hz = /bits/ 64 <300000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +
> +				opp-380000000 {
> +					opp-hz = /bits/ 64 <380000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};
> +
> +				opp-410000000 {
> +					opp-hz = /bits/ 64 <410000000>;
> +					required-opps = <&rpmhpd_opp_turbo>;
> +				};
> +
> +				opp-460000000 {
> +					opp-hz = /bits/ 64 <460000000>;
> +					required-opps = <&rpmhpd_opp_turbo_l1>;
> +				};
> +			};
> +		};
> +
>  		videocc: clock-controller@ab00000 {
>  			compatible = "qcom,qcs615-videocc";
>  			reg = <0 0xab00000 0 0x10000>;
> 
> -- 
> 2.34.1
>