[PATCH] dt-bindings: media: imx283: Describe sensor address using the reg property

[David Heidelberg]

Use the reg property instead of text in the description.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 .../devicetree/bindings/media/i2c/sony,imx283.yaml         | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
index e4f49f1435a5..f4ee991c89a3 100644
--- ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
+++ ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
@@ -13,16 +13,15 @@ maintainers:
 
 description:
   IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
-  array size of 5472H x 3648V. It is programmable through I2C interface. The
-  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
-  sent through MIPI CSI-2.
+  array size of 5472H x 3648V. It is programmable through I2C interface.
+  Image data is sent through MIPI CSI-2.
 
 properties:
   compatible:
     const: sony,imx283
 
   reg:
-    maxItems: 1
+    const: 0x1a
 
   clocks:
     description: Clock frequency from 6 to 24 MHz.
-- 
2.45.2