[PATCH] regulator: pca9450: use dev_err_probe on errors requesting resources

[Ahmad Fatoum]

Probe functions requesting resources may return -EPROBE_DEFER to
the driver core to instruct it to retry probe at a later time.
This is not unusual and printing an error message unconditionally
is just confusing to users:

  nxp-pca9450 0-0025: Failed to register regulator(buck1): -517

Using dev_err_probe remedies this:

The error message will only be shown if the error code is not
-EPROBE_DEFER and if it is, the deferral reason is saved for display
at a later time.

Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
 drivers/regulator/pca9450-regulator.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 9714afe347dcc0205b40243252638dff5f9298ad..8f5ba59f7fe52bee1e467a3e6adf81a6a5476221 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -953,13 +953,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 		config.dev = pca9450->dev;
 
 		rdev = devm_regulator_register(pca9450->dev, desc, &config);
-		if (IS_ERR(rdev)) {
-			ret = PTR_ERR(rdev);
-			dev_err(pca9450->dev,
-				"Failed to register regulator(%s): %d\n",
-				desc->name, ret);
-			return ret;
-		}
+		if (IS_ERR(rdev))
+			return dev_err_probe(pca9450->dev, PTR_ERR(rdev),
+				"Failed to register regulator(%s)\n",
+				desc->name);
 	}
 
 	if (pca9450->irq) {
@@ -968,9 +965,9 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 						(IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
 						"pca9450-irq", pca9450);
 		if (ret != 0) {
-			dev_err(pca9450->dev, "Failed to request IRQ: %d\n",
-				pca9450->irq);
-			return ret;
+			return dev_err_probe(pca9450->dev, ret,
+					     "Failed to request IRQ: %d\n",
+					     pca9450->irq);
 		}
 		/* Unmask all interrupt except PWRON/WDOG/RSVD */
 		ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK,
@@ -1022,10 +1019,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 	 */
 	pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);
 
-	if (IS_ERR(pca9450->sd_vsel_gpio)) {
-		dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
-		return PTR_ERR(pca9450->sd_vsel_gpio);
-	}
+	if (IS_ERR(pca9450->sd_vsel_gpio))
+		return dev_err_probe(&i2c->dev,
+				     PTR_ERR(pca9450->sd_vsel_gpio),
+				     "Failed to get SD_VSEL GPIO\n");
 
 	dev_info(&i2c->dev, "%s probed.\n",
 		type == PCA9450_TYPE_PCA9450A ? "pca9450a" :

---
base-commit: 78d4f34e2115b517bcbfe7ec0d018bbbb6f9b0b8
change-id: 20241217-pca9450-dev_err_probe-778149cae5ee

Best regards,
-- 
Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>