Re: [PATCH 4/4] arm64: dts: renesas: r8a779g0: Add VSPX instances

[Laurent Pinchart]

Hi Jacopo,

Thank you for the patch.

On Tue, Dec 17, 2024 at 06:53:17PM +0100, Jacopo Mondi wrote:
> Add device nodes for the VSPX instances on R-Car V4H (R8A779G0) SoC.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> index e49748563e2f5706ed982d6c9cc1df59f27bd0dc..bf4ec5fb7bbdba55e2994f332fcbd623839079c2 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> @@ -2211,6 +2211,28 @@ vspd1: vsp@fea28000 {
>  			renesas,fcp = <&fcpvd1>;
>  		};
>  
> +		vspx0: vsp@fedd0000 {

Please keep those sorted by unit address too.

> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfedd0000 0 0x8000>;
> +			interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>;

The interrupts are listed as "negative level sensitive" in the
documentation. Tomi encountered a similar situation with the V4M VSP,
and setting the level to low in the DT didn't work. I assume this will
be fine, but if you encounter interrupt issues, this is one possible
area to investigate.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

> +			clocks = <&cpg CPG_MOD 1028>;
> +			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1028>;
> +
> +			renesas,fcp = <&fcpvx0>;
> +		};
> +
> +		vspx1: vsp@fedd8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfedd8000 0 0x8000>;
> +			interrupts = <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 1029>;
> +			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1029>;
> +
> +			renesas,fcp = <&fcpvx1>;
> +		};
> +
>  		du: display@feb00000 {
>  			compatible = "renesas,du-r8a779g0";
>  			reg = <0 0xfeb00000 0 0x40000>;

-- 
Regards,

Laurent Pinchart