[PATCH 1/2] arm64: dts: rockchip: MECSBC: Remove i2c2 node

[Jonas Rebmann]

From: David Jander <david@xxxxxxxxxxx>

One of the pins of i2c2 is actually in use as chip select 0 for spi0.
The chip select 0 is used for an FRAM chip, which will be added in the
next patch.

Remove the i2c2 node from the rk3568-mecsbc device tree.

Signed-off-by: David Jander <david@xxxxxxxxxxx>
Signed-off-by: Jonas Rebmann <jre@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
index c491dc4d4947dc460330847dede052b1b25ba86c..ca041b4d2d38a4e06cd0a54a806fed2ab723c94d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
@@ -206,12 +206,6 @@ regulator-state-mem {
 	};
 };
 
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2m0_xfer>;
-};
-
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3m0_xfer>;

-- 
2.39.5