Re: [PATCH 2/8] iio: dac: ad3552r-hs: clear reset status flag

[Jonathan Cameron]

On Mon, 16 Dec 2024 21:36:22 +0100
Angelo Dureghello <adureghello@xxxxxxxxxxxx> wrote:

> From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> 
> Clear reset status flag, to keep error status register
> clean after reset (ad3552r manual, rev B table 38).
> 
> Fixes: 0b4d9fe58be8 ("iio: dac: ad3552r: add high-speed platform driver")
> Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
Again, something on what the visible effects of this area.
That helps people decide whether to backport.

Thanks,

Jonathan

> ---
>  drivers/iio/dac/ad3552r-hs.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/iio/dac/ad3552r-hs.c b/drivers/iio/dac/ad3552r-hs.c
> index 216c634f3eaf..8974df625670 100644
> --- a/drivers/iio/dac/ad3552r-hs.c
> +++ b/drivers/iio/dac/ad3552r-hs.c
> @@ -329,6 +329,12 @@ static int ad3552r_hs_setup(struct ad3552r_hs_state *st)
>  		dev_info(st->dev, "Chip ID error. Expected 0x%x, Read 0x%x\n",
>  			 AD3552R_ID, id);
>  
> +	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
> +	ret = st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_ERR_STATUS,
> +				      AD3552R_MASK_RESET_STATUS, 1);
> +	if (ret)
> +		return ret;
> +
>  	ret = st->data->bus_reg_write(st->back,
>  				      AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
>  				      0, 1);
>