[PATCH 0/2] Add driver for MAX42500

[Kent Libetario]

This patch series introduces a new hardware monitoring (hwmon) driver for
the MAX42500 hardware. The driver is a SoC power-system monitor with up to
seven voltage monitor inputs. Each input has programmable OV/UV thresholds
over the full temperature range and support DVS through the I2C interface.

The MAX42500 contains a programmable flexible power sequence recorder
(FPSR) and a programmable challenge/response watchdog with a configurable
RESET output. These are also accessible through the I2C interface.

The patches are organized as follows:
1. Patch 1/2: Add documentation for devicetree bindings of MAX42500 driver.
2. Patch 2/2: Add the core implementation of the MAX42500 hwmon driver.

The driver has been tested on the raspberry pi-4 platform.

Kent Libetario (2):
  dt-bindings: hwmon: add adi,max42500.yaml
  drivers: hwmon: add driver for max42500

 .../bindings/hwmon/adi,max42500.yaml          |   42 +
 MAINTAINERS                                   |    7 +
 drivers/hwmon/Kconfig                         |   13 +
 drivers/hwmon/Makefile                        |    1 +
 drivers/hwmon/max42500.c                      | 1049 +++++++++++++++++
 5 files changed, 1112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max42500.yaml
 create mode 100644 drivers/hwmon/max42500.c


base-commit: de076198d1e4934c5fc17aa52d5f1884f469ce1a
-- 
2.25.1