Re: [PATCH v4] drm/bridge: adv7511_audio: Update Audio InfoFrame properly

[Dmitry Baryshkov]

On Tue, 19 Nov 2024 08:40:29 +0100, Stefan Ekenberg wrote:
> AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
> while updating Audio InfoFrame information and then set to 0 when done.
> Otherwise partially updated Audio InfoFrames could be sent out. Two
> cases where this rule were not followed are fixed:
>  - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
>    before/after setting ADV7511_REG_AUDIO_INFOFRAME.
>  - In audio_startup() use the correct register for clearing
>    AUDIO_UPDATE bit.
> 
> [...]

Applied to drm-misc-fixes, thanks!

[1/1] drm/bridge: adv7511_audio: Update Audio InfoFrame properly
      commit: 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707

Best regards,
-- 
With best wishes
Dmitry