Re: [net-next v6 0/9] Add support for per-NAPI config via netlink

[Joe Damato]

On Wed, Dec 18, 2024 at 09:08:58AM -0800, Joe Damato wrote:
> On Wed, Dec 18, 2024 at 11:22:33AM +0000, Alex Lazar wrote:
> > Hi Joe and all,
> > 
> > I am part of the NVIDIA Eth drivers team, and we are experiencing a problem,
> > sibesced to this change: commit 86e25f40aa1e ("net: napi: Add napi_config")
> > 
> > The issue occurs when sending packets from one machine to another.
> > On the receiver side, we have XSK (XDPsock) that receives the packet and sends it
> > back to the sender.
> > At some point, one packet (packet A) gets "stuck," and if we send a new packet
> > (packet B), it "pushes" the previous one. Packet A is then processed by the NAPI
> > poll, and packet B gets stuck, and so on.
> > 
> > Your change involves moving napi_hash_del() and napi_hash_add() from
> > netif_napi_del() and netif_napi_add_weight() to napi_enable() and napi_disable().
> > If I move them back to netif_napi_del() and netif_napi_add_weight(),
> > the issue is resolved (I moved the entire if/else block, not just the napi_hash_del/add).
> > 
> > This issue occurs with both the new and old APIs (netif_napi_add/_config).
> > Moving the napi_hash_add() and napi_hash_del() functions resolves it for both.
> > I am debugging this, no breakthrough so far.
> > 
> > I would appreciate if you could look into this.
> > We can provide more details per request.
> 
> I appreciate your report, but there is not a lot in your message to
> help debug the issue.
> 
> Can you please:
> 
> 1.) Verify that the kernel tree you are testing on has commit
> cecc1555a8c2 ("net: Make napi_hash_lock irq safe") included ? If it
> does not, can you pull in that commit and re-run your test and
> report back if that fixes your problem?
> 
> 2.) If (1) does not fix your problem, can you please reply with at
> least the following information:
>   - Specify what device this is happening on (in case I have access
>     to one)
>   - Which driver is affected
>   - Which upstream kernel SHA you are building your test kernel from
>   - The reproducer program(s) with clear instructions on how exactly
>     to run it/them in order to reproduce the issue

I didn't hear back on the above, but wanted to let you know that
I'll be out of the office soon, so my responses/bandwidth for
helping to debug this will be limited over the next week or two.