Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery

[Claudiu Beznea]

On 18.12.2024 02:16, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Implement bus recovery by reinitializing the hardware to reset the bus
> state and generating 9 clock cycles (and a stop condition) to release
> the SDA line.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v1->v2
> - Used single register read to check SDA/SCL lines
> ---
>  drivers/i2c/busses/i2c-riic.c | 100 ++++++++++++++++++++++++++++++----
>  1 file changed, 90 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
> index 586092454bb2..d93c371a22de 100644
> --- a/drivers/i2c/busses/i2c-riic.c
> +++ b/drivers/i2c/busses/i2c-riic.c
> @@ -50,6 +50,7 @@
>  

[ ... ]

> +static int riic_recover_bus(struct i2c_adapter *adap)
> +{
> +	struct riic_dev *riic = i2c_get_adapdata(adap);
> +	struct device *dev = riic->adapter.dev.parent;
> +	int ret;
> +	u8 val;
> +
> +	ret = riic_init_hw(riic, true);
> +	if (ret)
> +		return -EINVAL;

Any reason for not returning directly the ret? It is true the
riic_init_hw() can, ATM, return only -EINVAL in case of failure.

Thank you,
Claudiu