Re: [PATCH] ARM: dts: ti: am437x-l4: remove autoidle for UART
From: Sukrut Bellary
Date: Sat Dec 21 2024 - 06:17:42 EST
On Fri, Dec 20, 2024 at 04:35:23PM -0600, Judith Mendez wrote:
> According to the TRM [0] in 21.5.1.42 UART_SYSC Register,
> the autoidle bit should not be set for UART, so remove the
> appropriate SYSC_OMAP2_AUTOIDLE flag.
>
> [0] https://www.ti.com/lit/ug/spruhl7i/spruhl7i.pdf
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> ---
> arch/arm/boot/dts/ti/omap/am437x-l4.dtsi | 18 ++++++------------
> 1 file changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
> index 824b9415ebbe9..fd4634f8c6293 100644
> --- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
> +++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
> @@ -180,8 +180,7 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */
> <0x9058 0x4>;
> reg-names = "rev", "sysc", "syss";
> ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> + SYSC_OMAP2_SOFTRESET)>;
> ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> <SYSC_IDLE_NO>,
> <SYSC_IDLE_SMART>,
> @@ -698,8 +697,7 @@ target-module@22000 { /* 0x48022000, ap 8 0a.0 */
> <0x22058 0x4>;
> reg-names = "rev", "sysc", "syss";
> ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> + SYSC_OMAP2_SOFTRESET)>;
> ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> <SYSC_IDLE_NO>,
> <SYSC_IDLE_SMART>,
> @@ -726,8 +724,7 @@ target-module@24000 { /* 0x48024000, ap 10 1c.0 */
> <0x24058 0x4>;
> reg-names = "rev", "sysc", "syss";
> ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> + SYSC_OMAP2_SOFTRESET)>;
> ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> <SYSC_IDLE_NO>,
> <SYSC_IDLE_SMART>,
> @@ -1385,8 +1382,7 @@ target-module@a6000 { /* 0x481a6000, ap 40 16.0 */
> <0xa6058 0x4>;
> reg-names = "rev", "sysc", "syss";
> ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> + SYSC_OMAP2_SOFTRESET)>;
> ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> <SYSC_IDLE_NO>,
> <SYSC_IDLE_SMART>,
> @@ -1413,8 +1409,7 @@ target-module@a8000 { /* 0x481a8000, ap 42 20.0 */
> <0xa8058 0x4>;
> reg-names = "rev", "sysc", "syss";
> ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> + SYSC_OMAP2_SOFTRESET)>;
> ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> <SYSC_IDLE_NO>,
> <SYSC_IDLE_SMART>,
> @@ -1441,8 +1436,7 @@ target-module@aa000 { /* 0x481aa000, ap 44 12.0 */
> <0xaa058 0x4>;
> reg-names = "rev", "sysc", "syss";
> ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> + SYSC_OMAP2_SOFTRESET)>;
> ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> <SYSC_IDLE_NO>,
> <SYSC_IDLE_SMART>,
> --
> 2.47.1
>
Looks good to me.
Reviewed-by: Sukrut Bellary <sbellary@xxxxxxxxxxxx>