[RFC net-next 2/9] i40e: Remove unused i40e_blink_phy_link_led

[linux]

From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>

i40e_blink_phy_link_led() was added in 2016 by
commit fd077cd3399b ("i40e: Add functions to blink led on 10GBaseT PHY")

but hasn't been used.

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@xxxxxxxxxxx>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 74 -------------------
 .../net/ethernet/intel/i40e/i40e_prototype.h  |  4 -
 2 files changed, 78 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 47e71f72d87b..ba780a949a47 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -4428,80 +4428,6 @@ u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num)
 	return (u8)(reg_val >> ((dev_num + 1) * 5)) & 0x1f;
 }
 
-/**
- * i40e_blink_phy_link_led
- * @hw: pointer to the HW structure
- * @time: time how long led will blinks in secs
- * @interval: gap between LED on and off in msecs
- *
- * Blinks PHY link LED
- **/
-int i40e_blink_phy_link_led(struct i40e_hw *hw,
-			    u32 time, u32 interval)
-{
-	u16 led_addr = I40E_PHY_LED_PROV_REG_1;
-	u16 gpio_led_port;
-	u8 phy_addr = 0;
-	int status = 0;
-	u16 led_ctl;
-	u8 port_num;
-	u16 led_reg;
-	u32 i;
-
-	i = rd32(hw, I40E_PFGEN_PORTNUM);
-	port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK);
-	phy_addr = i40e_get_phy_address(hw, port_num);
-
-	for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++,
-	     led_addr++) {
-		status = i40e_read_phy_register_clause45(hw,
-							 I40E_PHY_COM_REG_PAGE,
-							 led_addr, phy_addr,
-							 &led_reg);
-		if (status)
-			goto phy_blinking_end;
-		led_ctl = led_reg;
-		if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) {
-			led_reg = 0;
-			status = i40e_write_phy_register_clause45(hw,
-							 I40E_PHY_COM_REG_PAGE,
-							 led_addr, phy_addr,
-							 led_reg);
-			if (status)
-				goto phy_blinking_end;
-			break;
-		}
-	}
-
-	if (time > 0 && interval > 0) {
-		for (i = 0; i < time * 1000; i += interval) {
-			status = i40e_read_phy_register_clause45(hw,
-						I40E_PHY_COM_REG_PAGE,
-						led_addr, phy_addr, &led_reg);
-			if (status)
-				goto restore_config;
-			if (led_reg & I40E_PHY_LED_MANUAL_ON)
-				led_reg = 0;
-			else
-				led_reg = I40E_PHY_LED_MANUAL_ON;
-			status = i40e_write_phy_register_clause45(hw,
-						I40E_PHY_COM_REG_PAGE,
-						led_addr, phy_addr, led_reg);
-			if (status)
-				goto restore_config;
-			msleep(interval);
-		}
-	}
-
-restore_config:
-	status = i40e_write_phy_register_clause45(hw,
-						  I40E_PHY_COM_REG_PAGE,
-						  led_addr, phy_addr, led_ctl);
-
-phy_blinking_end:
-	return status;
-}
-
 /**
  * i40e_led_get_reg - read LED register
  * @hw: pointer to the HW structure
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 29f6a903a30c..c0a4bd53501c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -72,8 +72,6 @@ int i40e_led_set_phy(struct i40e_hw *hw, bool on,
 		     u16 led_addr, u32 mode);
 int i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr,
 		     u16 *val);
-int i40e_blink_phy_link_led(struct i40e_hw *hw,
-			    u32 time, u32 interval);
 
 /* admin send queue commands */
 
@@ -446,8 +444,6 @@ int i40e_read_phy_register(struct i40e_hw *hw, u8 page, u16 reg,
 int i40e_write_phy_register(struct i40e_hw *hw, u8 page, u16 reg,
 			    u8 phy_addr, u16 value);
 u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num);
-int i40e_blink_phy_link_led(struct i40e_hw *hw,
-			    u32 time, u32 interval);
 int i40e_aq_write_ddp(struct i40e_hw *hw, void *buff,
 		      u16 buff_size, u32 track_id,
 		      u32 *error_offset, u32 *error_info,
-- 
2.47.1