Re: [PATCH v7 12/19] drm/imx: Add i.MX8qxp Display Controller KMS
From: Dmitry Baryshkov
Date: Mon Dec 23 2024 - 06:32:29 EST
On Mon, Dec 23, 2024 at 02:41:40PM +0800, Liu Ying wrote:
> i.MX8qxp Display Controller(DC) is comprised of three main components that
> include a blit engine for 2D graphics accelerations, display controller for
> display output processing, as well as a command sequencer. Add kernel
> mode setting support for the display controller part with two CRTCs and
> two primary planes(backed by FetchLayer and FetchWarp respectively). The
> registers of the display controller are accessed without command sequencer
> involved, instead just by using CPU. The command sequencer is supposed to
> be used by the blit engine.
>
> Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx>
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
> v7:
> * Drop using typeof in macros and explicitly define variable types. (Dmitry)
> * Add a comment for disable_irq_nosync() to explain why _nosync. (Dmitry)
> * Inline dc_crtc_check_clock(). (Dmitry)
> * Use global drm_dc->pe. (Dmitry)
> * Drop dc_crtc_disable_at_unbind(). (Dmitry)
> * Add kernel doc for struct dc_{crtc,drm_device,plane}. (Dmitry)
> * Define common IRQ handlers separately for each IRQs. (Dmitry)
> * Rebase this patch upon next-20241220, so drop date entry from drm_driver
> and correctly include drm/clients/drm_client_setup.h.
> * Collect Maxime's R-b tag.
>
> v6:
> * No change.
>
> v5:
> * Replace .remove_new with .remove in dc-drv.c. (Uwe)
>
> v4:
> * Move dc_fg_displaymode(), dc_fg_panic_displaymode() and dc_lb_blendcontrol()
> function calls from KMS routine to initialization stage. (Dmitry)
> * Drop dc-crtc.h and dc-plane.h header files and move relevant defines to
> appropriate .h header files or .c source files. (Dmitry)
> * Drop futile "else" clause from dc_crtc_common_irq_handler(). (Dmitry)
> * Drop dc_drm->pe_rpm_count. (Dmitry)
> * Drop DC_{CRTCS,ENCODERS,PRIMARYS} macros and only use DC_DISPLAYS. (Dmitry)
> * Drop drmm_kcalloc() function call to allocate an array for storing IRQs.
> Instead, put it in struct dc_crtc. (Dmitry)
> * Call devm_request_irq() to request IRQs, instead of using drmm action.
> (Dmitry)
> * Call devm_drm_of_get_bridge() to find the next bridge. (Dmitry)
> * Select DRM_CLIENT_SELECTION due to rebase.
> * Select the missing DRM_DISPLAY_HELPER and DRM_BRIDGE_CONNECTOR.
> * Use DRM_FBDEV_DMA_DRIVER_OPS due to rebase.
> * Replace drm_fbdev_dma_setup() with drm_client_setup_with_fourcc() due to
> rebase.
> * Replace drmm_add_action_or_reset() with devm_add_action_or_reset() to
> register dc_drm_component_unbind_all() action.
> * Request interrupts in dc_crtc_post_init() after encoder initialization to
> make sure next bridge is found first.
>
> v3:
> * No change.
>
> v2:
> * Find next bridge from TCon's port.
> * Drop drm/drm_module.h include from dc-drv.c.
>
> drivers/gpu/drm/imx/dc/Kconfig | 5 +
> drivers/gpu/drm/imx/dc/Makefile | 5 +-
> drivers/gpu/drm/imx/dc/dc-crtc.c | 556 ++++++++++++++++++++++++++++++
> drivers/gpu/drm/imx/dc/dc-de.h | 3 +
> drivers/gpu/drm/imx/dc/dc-drv.c | 238 +++++++++++++
> drivers/gpu/drm/imx/dc/dc-drv.h | 22 ++
> drivers/gpu/drm/imx/dc/dc-kms.c | 143 ++++++++
> drivers/gpu/drm/imx/dc/dc-kms.h | 131 +++++++
> drivers/gpu/drm/imx/dc/dc-plane.c | 241 +++++++++++++
> 9 files changed, 1342 insertions(+), 2 deletions(-)
> create mode 100644 drivers/gpu/drm/imx/dc/dc-crtc.c
> create mode 100644 drivers/gpu/drm/imx/dc/dc-kms.c
> create mode 100644 drivers/gpu/drm/imx/dc/dc-kms.h
> create mode 100644 drivers/gpu/drm/imx/dc/dc-plane.c
>
> +
> +static int dc_plane_check_no_off_screen(struct drm_plane_state *state,
> + struct drm_crtc_state *crtc_state)
> +{
> + if (state->dst.x1 < 0 || state->dst.y1 < 0 ||
> + state->dst.x2 > crtc_state->adjusted_mode.hdisplay ||
> + state->dst.y2 > crtc_state->adjusted_mode.vdisplay) {
> + dc_plane_dbg(state->plane, "no off screen\n");
> + return -EINVAL;
> + }
Nit: doesn't drm_atomic_helper_check_plane_state() ensure in this already?
With that in mind
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> +
> + return 0;
> +}
> +
--
With best wishes
Dmitry