[PATCH v2 17/17] arm64: dts: rockchip: Add RK3562 evb2 devicetree

From: Kever Yang
Date: Tue Dec 24 2024 - 04:56:19 EST

Next message: tip-bot2 for Paolo Bonzini: " [tip: x86/tdx] x86/virt/tdx: Use auto-generated code to read global metadata"
Previous message: tip-bot2 for Kai Huang: "[tip: x86/tdx] x86/virt/tdx: Rename 'struct tdx_tdmr_sysinfo' to reflect the spec better"
In reply to: Kever Yang: "[PATCH v2 14/17] dt-bindings: arm: rockchip: Add rk3562 evb2 board"
Next in thread: Kever Yang: "[PATCH v2 03/17] dt-bindings: mmc: rockchip-dw-mshc: Add rk3562 compatible string"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Finley Xiao <finley.xiao@xxxxxxxxxxxxxx>

DRAM: DDR4
Storage: eMMC
PMIC: RK809
Audio: Headphone and speaker
Interface:
- USB3.0 HOST
- USB2.0 HOST
- PCIe x4 slot(pcie2x1 available)
- SD card slot
- GMAC
- debug UART0

NOTE: the USB3.0 and the PCIe reuse the comboPHY, so the USB3.0 work in
USB2 only mode.

Signed-off-by: Finley Xiao <finley.xiao@xxxxxxxxxxxxxx>
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---

Changes in v2: None

arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3562-evb2-v10.dts | 520 ++++++++++++++++++
2 files changed, 521 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 2e683d7eab58..3849a0d388e3 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-d.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts
new file mode 100644
index 000000000000..f3669e965cbf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3562.dtsi"
+
+/ {
+ model = "Rockchip RK3562 EVB V20 Board";
+ compatible = "rockchip,rk3562-evb2-v10", "rockchip,rk3562";
+
+ chosen: chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc0 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-vol-up {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume up";
+ press-threshold-microvolt = <17000>;
+ };
+
+ button-vol-down {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume down";
+ press-threshold-microvolt = <414000>;
+ };
+
+ button-menu {
+ linux,code = <KEY_MENU>;
+ label = "menu";
+ press-threshold-microvolt = <800000>;
+ };
+
+ button-back {
+ linux,code = <KEY_BACK>;
+ label = "back";
+ press-threshold-microvolt = <1200000>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ work_led: led-0 {
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc3v3_pcie20: vcc3v3-pcie20 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie20";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb_host: vcc5v0-usb-host {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_usb>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_usb>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_pwren>;
+ };
+
+ vcc3v3_clk: vcc3v3-clk {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+};
+
+&combphy_pu {
+ status = "okay";
+};
+
+&gmac0 {
+ phy-mode = "rgmii-rxid";
+ clock_in_out = "output";
+
+ snps,reset-gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 20000 100000>;
+
+ tx_delay = <0x42>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim0_miim
+ &rgmiim0_tx_bus2
+ &rgmiim0_rx_bus2
+ &rgmiim0_rgmii_clk
+ &rgmiim0_rgmii_bus
+ &ethm0_pins>;
+
+ phy-handle = <&rgmii_phy>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default", "pmic-sleep",
+ "pmic-power-off", "pmic-reset";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_logic";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_cpu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc2v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda0v9_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vccio_acodec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&mdio0 {
+ rgmii_phy: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ clocks = <&cru CLK_GMAC_ETH_OUT2IO>;
+ assigned-clocks = <&cru CLK_GMAC_ETH_OUT2IO>;
+ assigned-clock-rates = <25000000>;
+ };
+};
+
+&pcie2x1 {
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie20>;
+ status = "okay";
+};
+
+&pinctrl {
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_otg_pwren: usb-otg-pwren {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc0 {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ full-pwr-cycle-in-suspend;
+ status = "okay";
+};
+
+&sdmmc0 {
+ no-sdio;
+ no-mmc;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ no-sd;
+ no-mmc;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+ phy-supply = <&vcc5v0_usb_host>;
+};
+
+&u2phy_otg {
+ status = "okay";
+ phy-supply = <&vcc5v0_usb_otg>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usbdrd_dwc3 {
+ status = "okay";
+ dr_mode = "host";
+ extcon = <&u2phy>;
+ maximum-speed = "high-speed";
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,usb2-lpm-disable;
+};
--
2.25.1

Next message: tip-bot2 for Paolo Bonzini: " [tip: x86/tdx] x86/virt/tdx: Use auto-generated code to read global metadata"
Previous message: tip-bot2 for Kai Huang: "[tip: x86/tdx] x86/virt/tdx: Rename 'struct tdx_tdmr_sysinfo' to reflect the spec better"
In reply to: Kever Yang: "[PATCH v2 14/17] dt-bindings: arm: rockchip: Add rk3562 evb2 board"
Next in thread: Kever Yang: "[PATCH v2 03/17] dt-bindings: mmc: rockchip-dw-mshc: Add rk3562 compatible string"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]