Re: [PATCH 2/3] HID: steelseries: export charging state for the SteelSeries Arctis 9 headset

[Bastien Nocera]

On Wed, 2025-01-01 at 15:11 +0000, Christian Mayer wrote:
> The Arctis 9 headset provides the information if
> the power cable is plugged in and charging via the battery report.
> This information can be exported.
> 
> Signed-off-by: Christian Mayer <git@xxxxxxxxxxxx>

Reviewed-by: Bastien Nocera <hadess@xxxxxxxxxx>

> ---
>  drivers/hid/hid-steelseries.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hid/hid-steelseries.c b/drivers/hid/hid-
> steelseries.c
> index f102045a9b6b..d11296bc0e1e 100644
> --- a/drivers/hid/hid-steelseries.c
> +++ b/drivers/hid/hid-steelseries.c
> @@ -33,6 +33,7 @@ struct steelseries_device {
>  	struct power_supply *battery;
>  	uint8_t battery_capacity;
>  	bool headset_connected;
> +	bool battery_charging;
>  };
>  
>  #if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
> @@ -450,9 +451,12 @@ static int
> steelseries_headset_battery_get_property(struct power_supply *psy,
>  		val->intval = 1;
>  		break;
>  	case POWER_SUPPLY_PROP_STATUS:
> -		val->intval = sd->headset_connected ?
> -			POWER_SUPPLY_STATUS_DISCHARGING :
> -			POWER_SUPPLY_STATUS_UNKNOWN;
> +		if (sd->headset_connected) {
> +			val->intval = sd->battery_charging ?
> +				POWER_SUPPLY_STATUS_CHARGING :
> +				POWER_SUPPLY_STATUS_DISCHARGING;
> +		} else
> +			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
>  		break;
>  	case POWER_SUPPLY_PROP_SCOPE:
>  		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
> @@ -514,6 +518,7 @@ static int
> steelseries_headset_battery_register(struct steelseries_device *sd)
>  	/* avoid the warning of 0% battery while waiting for the
> first info */
>  	steelseries_headset_set_wireless_status(sd->hdev, false);
>  	sd->battery_capacity = 100;
> +	sd->battery_charging = false;
>  
>  	sd->battery = devm_power_supply_register(&sd->hdev->dev,
>  			&sd->battery_desc, &battery_cfg);
> @@ -650,6 +655,7 @@ static int steelseries_headset_raw_event(struct
> hid_device *hdev,
>  	struct steelseries_device *sd = hid_get_drvdata(hdev);
>  	int capacity = sd->battery_capacity;
>  	bool connected = sd->headset_connected;
> +	bool charging = sd->battery_charging;
>  	unsigned long flags;
>  
>  	/* Not a headset */
> @@ -685,6 +691,7 @@ static int steelseries_headset_raw_event(struct
> hid_device *hdev,
>  
>  		if (read_buf[0] == 0xaa && read_buf[1] == 0x01) {
>  			connected = true;
> +			charging = read_buf[4] == 0x01;
>  
>  			/*
>  			 * Found no official documentation about min
> and max.
> @@ -697,6 +704,7 @@ static int steelseries_headset_raw_event(struct
> hid_device *hdev,
>  			 * there is no known status of the device
> read_buf[0] == 0x55
>  			 */
>  			connected = false;
> +			charging = false;
>  		}
>  	}
>  
> @@ -717,6 +725,15 @@ static int steelseries_headset_raw_event(struct
> hid_device *hdev,
>  		power_supply_changed(sd->battery);
>  	}
>  
> +	if (charging != sd->battery_charging) {
> +		hid_dbg(sd->hdev,
> +			"Battery charging status changed from
> %scharging to %scharging\n",
> +			sd->battery_charging ? "" : "not ",
> +			charging ? "" : "not ");
> +		sd->battery_charging = charging;
> +		power_supply_changed(sd->battery);
> +	}
> +
>  request_battery:
>  	spin_lock_irqsave(&sd->lock, flags);
>  	if (!sd->removed)