Re: [PATCH 1/2] dt-bindings: phy: mediatek,xsphy: add property to set disconnect threshold

[Chunfeng Yun (云春峰)]

On Tue, 2024-11-26 at 09:51 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> Il 26/11/24 03:58, Chunfeng Yun ha scritto:
> > Add a property to tune usb2 phy's disconnect threshold.
> > And add a compatible for mt8196.
> > 
> 
> Is this a board-specific property? If so, can you please describe the
> reason?
No, it's a common property, all SoC with xsphy controller can use it.

Thanks

> 
> Thanks,
> Angelo
> 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > ---
> >   Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml | 8
> > ++++++++
> >   1 file changed, 8 insertions(+)
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
> > b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
> > index a9e3139fd421..2e012d5e1da1 100644
> > --- a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
> > @@ -49,6 +49,7 @@ properties:
> >         - enum:
> >             - mediatek,mt3611-xsphy
> >             - mediatek,mt3612-xsphy
> > +          - mediatek,mt8196-xsphy
> >         - const: mediatek,xsphy
> > 
> >     reg:
> > @@ -129,6 +130,13 @@ patternProperties:
> >           minimum: 1
> >           maximum: 7
> > 
> > +      mediatek,discth:
> > +        description:
> > +          The selection of disconnect threshold (U2 phy)
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        minimum: 1
> > +        maximum: 15
> > +
> >         mediatek,efuse-intr:
> >           description:
> >             The selection of Internal Resistor (U2/U3 phy)
> 
> 
>