From: Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
Add register sequences to support PCIe multilink configuration for 100MHz
reference clock. Maximum two PCIe links are supported.
Signed-off-by: Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
***NOTE***
Since I don't have the hardware required to validate PCIe Multilink +
USB functionality, kindly *do not merge* this series until it gets a
"Tested-by" tag with proper validation of the functionality.
Regards,
Siddharth.
drivers/phy/cadence/phy-cadence-torrent.c | 130 +++++++++++++++++++++-
1 file changed, 129 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index a281c0dfae97..b0b5f4bdd7e2 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -197,6 +197,7 @@
#define RX_SDCAL1_INIT_TMR 0x004CU
#define RX_SDCAL1_ITER_TMR 0x004DU
#define RX_CDRLF_CNFG 0x0080U
+#define RX_CDRLF_CNFG2 0x0081U
#define RX_CDRLF_CNFG3 0x0082U
#define RX_SIGDET_HL_FILT_TMR 0x0090U
#define RX_REE_GCSM1_CTRL 0x0108U
@@ -204,6 +205,7 @@
#define RX_REE_GCSM1_EQENM_PH2 0x010AU
#define RX_REE_GCSM2_CTRL 0x0110U
#define RX_REE_PERGCSM_CTRL 0x0118U
+#define RX_REE_PEAK_UTHR 0x0142U
#define RX_REE_ATTEN_THR 0x0149U
#define RX_REE_TAP1_CLIP 0x0171U
#define RX_REE_TAP2TON_CLIP 0x0172U
@@ -212,6 +214,7 @@
#define RX_DIAG_DFE_CTRL 0x01E0U
#define RX_DIAG_DFE_AMP_TUNE_2 0x01E2U
#define RX_DIAG_DFE_AMP_TUNE_3 0x01E3U
+#define RX_DIAG_REE_DAC_CTRL 0x01E4U
#define RX_DIAG_NQST_CTRL 0x01E5U
#define RX_DIAG_SIGDET_TUNE 0x01E8U
#define RX_DIAG_PI_RATE 0x01F4U
@@ -3131,6 +3134,101 @@ static void cdns_torrent_phy_remove(struct platform_device *pdev)
cdns_torrent_clk_cleanup(cdns_phy);
}
+/* Multi link PCIe configuration */
+static struct cdns_reg_pairs ml_pcie_link_cmn_regs[] = {
+ {0x0002, PHY_PLL_CFG},
+ {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0}
+};
+
+static struct cdns_reg_pairs ml_pcie_xcvr_diag_ln_regs[] = {
+ {0x0100, XCVR_DIAG_HSCLK_SEL},
+ {0x0001, XCVR_DIAG_HSCLK_DIV},
+ {0x0812, XCVR_DIAG_PLLDRC_CTRL}
+};