[PATCH v2 00/10] DTS updates for system1 BMC

[Ninad Palsule]

Hello,

Please review the patch set.

V2:
---
  Fixed CHECK_DTBS errors by
    - Using generic node names
    - Documenting phy-mode rgmii-rxid in ftgmac100.yaml
    - Adding binding documentation for IPMB device interface

NINAD PALSULE (7):
  ARM: dts: aspeed: system1: Add IPMB device
  ARM: dts: aspeed: system1: Add GPIO line name
  ARM: dts: aspeed: system1: Add RGMII support
  ARM: dts: aspeed: system1: Reduce sgpio speed
  ARM: dts: aspeed: system1: Update LED gpio name
  ARM: dts: aspeed: system1: Remove VRs max8952
  ARM: dts: aspeed: system1: Mark GPIO line high/low

Ninad Palsule (3):
  dt-bindings: net: faraday,ftgmac100: Add phys mode
  bindings: ipmi: Add binding for IPMB device intf
  ARM: dts: aspeed: system1: Disable gpio pull down

 .../devicetree/bindings/ipmi/ipmb-dev.yaml    |  42 +++++
 .../bindings/net/faraday,ftgmac100.yaml       |   3 +
 .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 177 ++++++++++++------
 3 files changed, 163 insertions(+), 59 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml

-- 
2.43.0