[PATCH v3 0/4] Input: cyttsp5 - improve error handling and remove regmap

[Vasiliy Doylov via B4 Relay]

The vendor cyttsp5 driver does not use regmap for i2c support, it
would appear this is due to regmap not providing sufficient levels
of control to handle various error conditions that may be present
under some configuration/firmware variants.

To improve reliability lets refactor the cyttsp5 i2c interface to
function more like the vendor driver and implement some of the error
handling retry/recovery techniques present there.

As part of this rather than assuming the device is in bootloader mode
we should first check that the device is in bootloader and only
attempt to launch the app if it actually is in the bootloader.

Co-developed-by: James Hilliard <james.hilliard1@xxxxxxxxx>
Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
Signed-off-by: Vasiliy Doylov (NekoCWD) <nekodevelopper@xxxxxxxxx>
---
Changes v1 -> v2:
  - remove unused reg variable
Changes v2 -> v3:
  - splitted commit
---

---
Vasiliy Doylov (NekoCWD) (4):
      input: cyttsp5: improve error handling
      input: cyttsp5: improve read size
      input: cyttsp5: use raw i2c instead of regmap
      input: cyttsp5: add startup retry

 drivers/input/touchscreen/cyttsp5.c | 257 +++++++++++++++++++++++-------------
 1 file changed, 168 insertions(+), 89 deletions(-)
---
base-commit: 6ecd20965bdc21b265a0671ccf36d9ad8043f5ab
change-id: 20250110-nekocwd-upstreaming-cyttsp5-b84ed9127c44

Best regards,
-- 
Vasiliy Doylov (NekoCWD) <nekodevelopper@xxxxxxxxx>