Re: [PATCH 10/12] dt-bindings: phy: allwinner: add v853 usb phy
From: Krzysztof Kozlowski
Date: Fri Jan 10 2025 - 08:53:41 EST
On 10/01/2025 13:39, Andras Szemzo wrote:
> +
> +properties:
> + "#phy-cells":
> + const: 1
> +
> + compatible:
> + const:
> + - allwinner,sun8i-v853-usb-phy
Wrong indentation, never tested.
Compatible is always the first property.
> +
> + reg:
> + items:
> + - description: PHY Control registers
> + - description: PHY PMU0 registers
> +
> + reg-names:
> + items:
> + - const: phy_ctrl
> + - const: pmu0
> +
> + clocks:
> + maxItems: 1
> + description: USB OHCI PHY bus clock
Redundant description really...
> +
> + clock-names:
> + const: usb0_phy
Drop clock-names, not really helpful.
> +
> + resets:
> + maxItems: 1
> + description: USB OHCI reset
> +
> + reset-names:
> + const: usb0_reset
Drop names, also not really helping.
> +
> + usb0_id_det-gpios:
There are no properties with underscores.
I don't get why you are using "usb0" prefix. Document all pins, so
"usb1" as well, assuming it exists.
It anyway looks questionable - aren't these properties of connector?
> + maxItems: 1
> + description: GPIO to the USB OTG ID pin
> +
> + usb0_vbus_det-gpios:
> + maxItems: 1
> + description: GPIO to the USB OTG VBUS detect pin
> +
> + usb0_vbus_power-supply:
> + description: Power supply to detect the USB OTG VBUS
> +
> + usb0_vbus-supply:
> + description: Regulator controlling USB OTG VBUS
Regulator and power supply are here synonyms, so I don't understand
these two properties.
> +
> +required:
> + - "#phy-cells"
> + - compatible
> + - clocks
> + - clock-names
> + - reg
> + - reg-names
> + - resets
> + - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/clock/sun8i-v853-ccu.h>
> + #include <dt-bindings/reset/sun8i-v853-ccu.h>
> +
> + usbphy: phy@4100400 {
> + #phy-cells = <1>;
Please follow DTS coding style.
Best regards,
Krzysztof