[PATCH net-next 0/2] net: phy: dp83822: Add support for changing the transmit amplitude voltage

[Dimitri Fedrau via B4 Relay]

Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Add support for configuration via DT.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
---
Dimitri Fedrau (2):
      dt-bindings: net: dp83822: Add support for changing the transmit amplitude voltage
      net: phy: dp83822: Add support for changing the transmit amplitude voltage

 .../devicetree/bindings/net/ti,dp83822.yaml        | 11 +++++++
 drivers/net/phy/dp83822.c                          | 35 ++++++++++++++++++++++
 2 files changed, 46 insertions(+)
---
base-commit: 7d0da8f862340c5f42f0062b8560b8d0971a6ac4
change-id: 20241213-dp83822-tx-swing-5ba6c1e9b065

Best regards,
-- 
Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>