Re: [PATCH v2] power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>


On Thu, 02 Jan 2025 13:15:30 +0100, Bartosz Golaszewski wrote:
> With the recent rework of the PCI power control code, the workaround for
> the wlan-enable GPIO - where we don't set a default (low) state in the
> power sequencing driver, but instead request the pin as-is - should no
> longer be needed but some platforms still fail to probe the WLAN
> controller. This is caused by the Qcom PCIe controller and needs a
> workaround in the controller driver so add a FIXME to eventually remove
> the hack from this driver once this is done.
> 
> [...]

Applied, thanks!

[1/1] power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack
      commit: 29da3e8748f97dcf01498b00d42a3e7574ece80b

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>