Re: [PATCH v3 2/9] iio: dac: ad3552r-hs: clear reset status flag

From: Angelo Dureghello
Date: Mon Jan 13 2025 - 11:58:44 EST


Hi,

On 13.01.2025 15:58, Nuno Sá wrote:
> On Sun, 2025-01-12 at 15:04 +0000, Jonathan Cameron wrote:
> > On Fri, 10 Jan 2025 11:24:14 +0100
> > Angelo Dureghello <adureghello@xxxxxxxxxxxx> wrote:
> >
> > > From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> > >
> > > Clear reset status flag, to keep error status register
> > > clean after reset (ad3552r manual, rev B table 38).
> > >
> > > Reset error flag was left to 1, so debugging registers, the
> > > "Error Status Register" was dirty (0x01). It is important
> > > to clear this bit, so if there is any reset event over normal
> > > working mode, it is possible to detect it.
> > >
> > > Fixes: 0b4d9fe58be8 ("iio: dac: ad3552r: add high-speed platform driver")
> > > Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx>
> > > Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> > Ah. I should have checked for newer versions. Anyhow, picked up v2 of patches
> > 1 and 2.
>
> Oh just saw this now. Anyways, just gave my tag for patch 1. If you can still
> take it, feel free to do so. Same for this one:
>
> Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
>

thanks a lot.

Patch 1/9 has no changes, i'll re post it anyway with updated tags.
Patch 2/9 has a dev_err removal, should eventually be re-applied.

Will track this on the changhe log.


> >
> > > ---
> > >  drivers/iio/dac/ad3552r-hs.c | 6 ++++++
> > >  1 file changed, 6 insertions(+)
> > >
> > > diff --git a/drivers/iio/dac/ad3552r-hs.c b/drivers/iio/dac/ad3552r-hs.c
> > > index 216c634f3eaf..8974df625670 100644
> > > --- a/drivers/iio/dac/ad3552r-hs.c
> > > +++ b/drivers/iio/dac/ad3552r-hs.c
> > > @@ -329,6 +329,12 @@ static int ad3552r_hs_setup(struct ad3552r_hs_state
> > > *st)
> > >   dev_info(st->dev, "Chip ID error. Expected 0x%x, Read
> > > 0x%x\n",
> > >   AD3552R_ID, id);
> > >  
> > > + /* Clear reset error flag, see ad3552r manual, rev B table 38. */
> > > + ret = st->data->bus_reg_write(st->back,
> > > AD3552R_REG_ADDR_ERR_STATUS,
> > > +       AD3552R_MASK_RESET_STATUS, 1);
> > > + if (ret)
> > > + return ret;
> > > +
> > >   ret = st->data->bus_reg_write(st->back,
> > >         AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
> > >         0, 1);
> > >
> >
>


Regards,
angelo