[PATCH v4 0/9] DTS updates for system1 BMC

[Ninad Palsule]

Hello,

Please review the patch set.

V4:
---
  - Removed "Add RGMII support" patch as it needs some work from the
    driver side.
  - Improved IPBM device documentation.
  - There is a new warning in CHECK_DTBS which are false positive so
    ignored them.
    arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@1e780000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+'

V3:
---
  - Fixed dt_binding_check warnings in ipmb-dev.yaml
  - Updated title and description in ipmb-dev.yaml file.
  - Updated i2c-protocol description in ipmb-dev.yaml file.

V2:
---
  Fixed CHECK_DTBS errors by
    - Using generic node names
    - Documenting phy-mode rgmii-rxid in ftgmac100.yaml
    - Adding binding documentation for IPMB device interface

NINAD PALSULE (6):
  ARM: dts: aspeed: system1: Add IPMB device
  ARM: dts: aspeed: system1: Add GPIO line name
  ARM: dts: aspeed: system1: Reduce sgpio speed
  ARM: dts: aspeed: system1: Update LED gpio name
  ARM: dts: aspeed: system1: Remove VRs max8952
  ARM: dts: aspeed: system1: Mark GPIO line high/low

Ninad Palsule (3):
  dt-bindings: net: faraday,ftgmac100: Add phys mode
  bindings: ipmi: Add binding for IPMB device intf
  ARM: dts: aspeed: system1: Disable gpio pull down

 .../devicetree/bindings/ipmi/ipmb-dev.yaml    |  55 +++++++
 .../bindings/net/faraday,ftgmac100.yaml       |   3 +
 .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 139 +++++++++++-------
 3 files changed, 143 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml

-- 
2.43.0