Re: [PATCH v5 05/16] PCI/AER: Add CXL PCIe Port correctable error support in AER service driver

[Ira Weiny]

Terry Bowman wrote:
> The AER service driver supports handling Downstream Port Protocol Errors in
> Restricted CXL host (RCH) mode also known as CXL1.1. It needs the same
> functionality for CXL PCIe Ports operating in Virtual Hierarchy (VH)
> mode.[1]
> 
> CXL and PCIe Protocol Error handling have different requirements that
> necessitate a separate handling path. The AER service driver may try to
> recover PCIe uncorrectable non-fatal errors (UCE). The same recovery is not
> suitable for CXL PCIe Port devices because of potential for system memory
> corruption. Instead, CXL Protocol Error handling must use a kernel panic
> in the case of a fatal or non-fatal UCE. The AER driver's PCIe Protocol
> Error handling does not panic the kernel in response to a UCE.
> 
> Introduce a separate path for CXL Protocol Error handling in the AER
> service driver. This will allow CXL Protocol Errors to use CXL specific
> handling instead of PCIe handling. Add the CXL specific changes without
> affecting or adding functionality in the PCIe handling.
> 
> Make this update alongside the existing Downstream Port RCH error handling
> logic, extending support to CXL PCIe Ports in VH mode.
> 
> is_internal_error() is currently limited by CONFIG_PCIEAER_CXL kernel
> config. Update is_internal_error()'s function declaration such that it is
> always available regardless if CONFIG_PCIEAER_CXL kernel config is enabled
> or disabled.
> 
> The uncorrectable error (UCE) handling will be added in a future patch.
> 
> [1] CXL 3.1 Spec, 12.2.2 CXL Root Ports, Downstream Switch Ports, and
> Upstream Switch Ports
> 
> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Reviewed-by: Dave Jiang <dave.jiang@xxxxxxxxx>

Reviewed-by: Ira Weiny <ira.weiny@xxxxxxxxx>

[snip]