[PATCH net] net: phy: realtek: clear status if link is down
From: Daniel Golle
Date: Tue Jan 14 2025 - 19:46:36 EST
Clear speed, duplex and master/slave status in case the link is down
to avoid reporting bogus link(-partner) properties.
Fixes: 5cb409b3960e ("net: phy: realtek: clear 1000Base-T link partner advertisement")
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
drivers/net/phy/realtek.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index f65d7f1f348e..3f0e03e2abce 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -720,8 +720,12 @@ static int rtlgen_read_status(struct phy_device *phydev)
if (ret < 0)
return ret;
- if (!phydev->link)
+ if (!phydev->link) {
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+ phydev->speed = SPEED_UNKNOWN;
return 0;
+ }
val = phy_read_paged(phydev, 0xa43, 0x12);
if (val < 0)
@@ -1028,11 +1032,11 @@ static int rtl822x_c45_read_status(struct phy_device *phydev)
return ret;
if (phydev->autoneg == AUTONEG_DISABLE ||
- !genphy_c45_aneg_done(phydev))
+ !genphy_c45_aneg_done(phydev) ||
+ !phydev->link) {
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
-
- /* Vendor register as C45 has no standardized support for 1000BaseT */
- if (phydev->autoneg == AUTONEG_ENABLE) {
+ } else {
+ /* Vendor register as C45 has no standardized support for 1000BaseT */
val = phy_read_mmd(phydev, MDIO_MMD_VEND2,
RTL822X_VND2_GANLPAR);
if (val < 0)
@@ -1041,8 +1045,12 @@ static int rtl822x_c45_read_status(struct phy_device *phydev)
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val);
}
- if (!phydev->link)
+ if (!phydev->link) {
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+ phydev->speed = SPEED_UNKNOWN;
return 0;
+ }
/* Read actual speed from vendor register. */
val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL_VND2_PHYSR);
--
2.47.1