[PATCH 0/2] RISC-V IOMMU HPM support

[Zong Li]

This serie implements the RISC-V IOMMU hardware performance monitor
includes both counting and sampling modes.

The specification does not define an event ID for counting the number of
clock cycles, meaning there is no associated `iohpmevt0`. However, we
need an event for counting cycle, so we reserve the maximum event ID for
it.

The interrupt handler needs to be a primary handler instead of a
threaded function because 'pt_regs` is empty when threading the IRQ.
However `pt_regs` is required by perf_event_overflow()

Changed in RFC:
- Rebase onto v6.13-rc7
- Clear interrupt pending before handling interrupt
- Fix the counter value issue caused by OF bit in the cycle counter.
- Invoke riscv_iommu_hpm_disable() instead of riscv_iommu_pmu_uninit()
  in riscv_iommu_remove()

Zong Li (2):
  iommu/riscv: add RISC-V IOMMU PMU support
  iommu/riscv: support HPM and interrupt handling

 drivers/iommu/riscv/Makefile     |   2 +-
 drivers/iommu/riscv/iommu-bits.h |  16 +
 drivers/iommu/riscv/iommu-pmu.c  | 486 +++++++++++++++++++++++++++++++
 drivers/iommu/riscv/iommu.c      |  65 +++++
 drivers/iommu/riscv/iommu.h      |   8 +
 5 files changed, 576 insertions(+), 1 deletion(-)
 create mode 100644 drivers/iommu/riscv/iommu-pmu.c

-- 
2.17.1