[PATCH v2 3/3] arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers

[Manikanta Mylavarapu]

Enable the PCIe controller and PHY nodes corresponding to RDP466.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V2:
	- Drop the inner wrapper in pcie2_default_state and
	  pcie3_default_state nodes.
	- Reordered the pcie nodes.

 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 41 ++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index b6e4bb3328b3..73e6b38ecc26 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -53,6 +53,30 @@ &dwc_1 {
 	dr_mode = "host";
 };
 
+&pcie2 {
+	pinctrl-0 = <&pcie2_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie3 {
+	pinctrl-0 = <&pcie3_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie3_phy {
+	status = "okay";
+};
+
 &qusb_phy_0 {
 	vdd-supply = <&vreg_misc_0p925>;
 	vdda-pll-supply = <&vreg_misc_1p8>;
@@ -147,6 +171,22 @@ data-pins {
 			bias-pull-up;
 		};
 	};
+
+	pcie2_default_state: pcie2-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
 };
 
 &uart1 {
@@ -166,4 +206,3 @@ &usb3 {
 &xo_board {
 	clock-frequency = <24000000>;
 };
-
-- 
2.34.1