Re: [PATCH v5 3/3] arm64: dts: s32g399a-rdb3: Add INA231 sensor entry over I2C4

[Frank Li]

On Mon, Jan 13, 2025 at 01:05:12PM +0200, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
>
> Add INA231 current sensor for S32G399A-RDB3 boards.
>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---

Reviewed-by: Frank Li <Frank.Li@xxxxxxx>

>  arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> index 94f531be4017..802f543cae4a 100644
> --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> @@ -40,6 +40,14 @@ &uart1 {
>  	status = "okay";
>  };
>
> +&i2c4 {
> +	current-sensor@40 {
> +		compatible = "ti,ina231";
> +		reg = <0x40>;
> +		shunt-resistor = <1000>;
> +	};
> +};
> +
>  &usdhc0 {
>  	pinctrl-names = "default", "state_100mhz", "state_200mhz";
>  	pinctrl-0 = <&pinctrl_usdhc0>;
> --
> 2.45.2
>