Re: [PATCH v3 2/2] net/ncsi: fix state race during channel probe completion

From: Potin Lai
Date: Wed Jan 15 2025 - 19:38:37 EST


On Tue, Jan 14, 2025 at 8:55 PM Paul Fertser <fercerpav@xxxxxxxxx> wrote:
>
> Hello,
>
> On Mon, Jan 13, 2025 at 10:34:48AM +0800, Potin Lai wrote:
> > During channel probing, the last NCSI_PKT_CMD_DP command can trigger
> > an unnecessary schedule_work() via ncsi_free_request(). We observed
> > that subsequent config states were triggered before the scheduled
> > work completed, causing potential state handling issues.
>
> Please let's not make this whole NC-SI story even less comprehensible
> than it already is. From this commit message I was unable to
> understand what exactly is racing with what and under which
> conditions. "Can trigger" would imply that it does not always trigger
> that wrong state transition but that would also mean there's a set of
> conditions that is necessary for bug to happen.
>
> > Fix this by clearing req_flags when processing the last package.
>
> After reading the code for a few hours I can probably see how lack of
> proper processing of the response to the last "Package Deselect" call
> can mix up the states.
>
> How about this diff instead (tested on Tioga Pass but there we didn't
> have any issues in the first place)?
>
> diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> index bf276eaf9330..7891a537bddd 100644
> --- a/net/ncsi/ncsi-manage.c
> +++ b/net/ncsi/ncsi-manage.c
> @@ -1385,6 +1385,12 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
> nd->state = ncsi_dev_state_probe_package;
> break;
> case ncsi_dev_state_probe_package:
> + if (ndp->package_probe_id >= 8) {
> + /* Last package probed, finishing */
> + ndp->flags |= NCSI_DEV_PROBED;
> + break;
> + }
> +
> ndp->pending_req_num = 1;
>
> nca.type = NCSI_PKT_CMD_SP;
> @@ -1501,13 +1507,8 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
> if (ret)
> goto error;
>
> - /* Probe next package */
> + /* Probe next package after receiving response */
> ndp->package_probe_id++;
> - if (ndp->package_probe_id >= 8) {
> - /* Probe finished */
> - ndp->flags |= NCSI_DEV_PROBED;
> - break;
> - }
> nd->state = ncsi_dev_state_probe_package;
> ndp->active_package = NULL;
> break;
>
> --
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:fercerpav@xxxxxxxxx

Hi Paul,

Thank you for your suggestion! I tested the patch, and it works perfectly.
Could you please help to send it out? I appreciate your assistance.

Best regards,
Potin