[PATCH v2 2/2] iio: adc: rzg2l: Cleanup suspend/resume path

[Claudiu]

From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

There is no need to manually track the runtime PM status in the driver.
The pm_runtime_force_suspend() and pm_runtime_force_resume() functions
already call pm_runtime_status_suspended() to check the runtime PM state.

Additionally, avoid calling pm_runtime_put_autosuspend() during the
suspend/resume path, as this would decrease the usage counter of a
potential user that had the ADC open before the suspend/resume cycle.

Fixes: cb164d7c1526 ("iio: adc: rzg2l_adc: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---

Changes in v2:
- none

 drivers/iio/adc/rzg2l_adc.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 4742a727a80c..99cb73347b18 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -89,7 +89,6 @@ struct rzg2l_adc {
 	struct mutex lock;
 	int irq;
 	u16 last_val[RZG2L_ADC_MAX_CHANNELS];
-	bool was_rpm_active;
 };
 
 /**
@@ -580,14 +579,9 @@ static int rzg2l_adc_suspend(struct device *dev)
 	};
 	int ret;
 
-	if (pm_runtime_suspended(dev)) {
-		adc->was_rpm_active = false;
-	} else {
-		ret = pm_runtime_force_suspend(dev);
-		if (ret)
-			return ret;
-		adc->was_rpm_active = true;
-	}
+	ret = pm_runtime_force_suspend(dev);
+	if (ret)
+		return ret;
 
 	ret = reset_control_bulk_assert(ARRAY_SIZE(resets), resets);
 	if (ret)
@@ -596,9 +590,7 @@ static int rzg2l_adc_suspend(struct device *dev)
 	return 0;
 
 rpm_restore:
-	if (adc->was_rpm_active)
-		pm_runtime_force_resume(dev);
-
+	pm_runtime_force_resume(dev);
 	return ret;
 }
 
@@ -616,11 +608,9 @@ static int rzg2l_adc_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	if (adc->was_rpm_active) {
-		ret = pm_runtime_force_resume(dev);
-		if (ret)
-			goto resets_restore;
-	}
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		goto resets_restore;
 
 	ret = rzg2l_adc_hw_init(dev, adc);
 	if (ret)
@@ -629,10 +619,7 @@ static int rzg2l_adc_resume(struct device *dev)
 	return 0;
 
 rpm_restore:
-	if (adc->was_rpm_active) {
-		pm_runtime_mark_last_busy(dev);
-		pm_runtime_put_autosuspend(dev);
-	}
+	pm_runtime_force_suspend(dev);
 resets_restore:
 	reset_control_bulk_assert(ARRAY_SIZE(resets), resets);
 	return ret;
-- 
2.43.0