[PATCH 6.1] Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals

[Ron Economos]

This fixes the build when CONFIG_PM is not set

Signed-off-by: Ron Economos <re@xxxxxxxx>
---
 drivers/usb/host/xhci-pci.c | 8 +++++++-
 include/linux/usb/hcd.h     | 2 ++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1d71e8ef9919..2ff049e02326 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -571,6 +571,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
 		pci_set_power_state(dev, PCI_D3hot);
 }
 
+#ifdef CONFIG_PM
 /*
  * In some Intel xHCI controllers, in order to get D3 working,
  * through a vendor specific SSIC CONFIG register at offset 0x883c,
@@ -720,6 +721,7 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 		pci_set_power_state(pdev, PCI_D3hot);
 }
+#endif /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
 
@@ -761,17 +763,21 @@ static struct pci_driver xhci_pci_driver = {
 	/* suspend and resume implemented later */
 
 	.shutdown = 	usb_hcd_pci_shutdown,
+#ifdef CONFIG_PM
 	.driver = {
-		.pm = pm_ptr(&usb_hcd_pci_pm_ops),
+		.pm = &usb_hcd_pci_pm_ops
 	},
+#endif
 };
 
 static int __init xhci_pci_init(void)
 {
 	xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
+#ifdef CONFIG_PM
 	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
 	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
 	xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
+#endif
 	return pci_register_driver(&xhci_pci_driver);
 }
 module_init(xhci_pci_init);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 575716d3672a..cd667acf6267 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -486,7 +486,9 @@ extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
 
 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
 
+#ifdef CONFIG_PM
 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
 #endif /* CONFIG_USB_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
-- 
2.43.0