Re: [PATCH] arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts

From: Dragan Simic
Date: Sun Jan 19 2025 - 04:54:45 EST


Hello Tianling,

Thanks for the patch. Please, see a comment below.

On 2025-01-19 10:11, Tianling Shen wrote:
In general the delay should be added by the PHY instead of the MAC,
and this improves network stability on some boards which seem to
need different delay.

Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
Cc: stable@xxxxxxxxxxxxxxx # 6.6+
Signed-off-by: Tianling Shen <cnsztl@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +--
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi | 1 -
3 files changed, 2 insertions(+), 3 deletions(-)

diff --git
a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 67c246ad8b8c..ec2ce894da1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -17,8 +17,7 @@ / {

&gmac2io {
phy-handle = <&yt8531c>;
- tx_delay = <0x19>;
- rx_delay = <0x05>;
+ phy-mode = "rgmii-id";

Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted
into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters,
respectively, so the Motorcomm PHY driver can pick them up and
actually configure the internal PHY delays?

status = "okay";

mdio {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
index 324a8e951f7e..846b931e16d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@ / {

&gmac2io {
phy-handle = <&rtl8211e>;
+ phy-mode = "rgmii";
tx_delay = <0x24>;
rx_delay = <0x18>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
index 4f193704e5dc..09508e324a28 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
@@ -109,7 +109,6 @@ &gmac2io {
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
clock_in_out = "input";
- phy-mode = "rgmii";
phy-supply = <&vcc_io>;
pinctrl-0 = <&rgmiim1_pins>;
pinctrl-names = "default";