[PATCH 0/9] mips: dts: Split Realtek devicetrees

[Sander Vanheule]

This patch series intends to clean up the base includes, shared between
hardware devicetrees. To get rid of some dtbs_check warnings, some cpu
clock prorerties are also modified.

To indicate why the split-up is required, the series concludes with
adding some CPU peripherals to rtl838x.dtsi, which are then used to add
a gpio-restart for the Cisco SG220-26P.

Sander Vanheule (9):
  mips: dts: realtek: Decouple RTL930x base DTSI
  mips: dts: realtek: Clean up CPU clocks
  mips: dts: realtek: Add address to SoC node name
  mips: dts: realtek: Fold rtl83xx into rtl838x
  mips: dts: realtek: Add SoC IRQ node for RTL838x
  mips: dts: realtek: Correct uart interrupt-parent
  mips: dts: realtek: Replace uart clock property
  mips: dts: realtek: Add RTL838x SoC peripherals
  mips: dts: realtek: Add restart to Cisco SG220-26P

 arch/mips/boot/dts/realtek/cisco_sg220-26.dts |  10 +-
 arch/mips/boot/dts/realtek/rtl838x.dtsi       | 111 +++++++++++++-
 arch/mips/boot/dts/realtek/rtl83xx.dtsi       |  59 --------
 arch/mips/boot/dts/realtek/rtl930x.dtsi       | 136 +++++++++++-------
 4 files changed, 202 insertions(+), 114 deletions(-)
 delete mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi

-- 
2.48.1