[PATCH 2/2] platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile

From: Armin Wolf
Date: Sun Jan 19 2025 - 15:18:04 EST


On machines that do not support the balanced profile the value of
last_non_turbo_profile is invalid after initialization which might
cause the driver to switch to an unsupported platform profile later.

Fix this by only setting last_non_turbo_profile to supported platform
profile values.

Fixes: 191e21f1a4c3 ("platform/x86: acer-wmi: use an ACPI bitmap to set the platform profile choices")
Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
---
drivers/platform/x86/acer-wmi.c | 41 +++++++++++++++++++++------------
1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index a85c881d1f24..69336bd778ee 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -792,7 +792,7 @@ static bool platform_profile_support;
* The profile used before turbo mode. This variable is needed for
* returning from turbo mode when the mode key is in toggle mode.
*/
-static int last_non_turbo_profile;
+static int last_non_turbo_profile = INT_MIN;

/* The most performant supported profile */
static int acer_predator_v4_max_perf;
@@ -2034,32 +2034,43 @@ acer_predator_v4_platform_profile_probe(void *drvdata, unsigned long *choices)
/* Iterate through supported profiles in order of increasing performance */
if (test_bit(ACER_PREDATOR_V4_THERMAL_PROFILE_ECO, &supported_profiles)) {
set_bit(PLATFORM_PROFILE_LOW_POWER, choices);
- acer_predator_v4_max_perf =
- ACER_PREDATOR_V4_THERMAL_PROFILE_ECO;
+ acer_predator_v4_max_perf = ACER_PREDATOR_V4_THERMAL_PROFILE_ECO;
+ last_non_turbo_profile = ACER_PREDATOR_V4_THERMAL_PROFILE_ECO;
}

if (test_bit(ACER_PREDATOR_V4_THERMAL_PROFILE_QUIET, &supported_profiles)) {
set_bit(PLATFORM_PROFILE_QUIET, choices);
- acer_predator_v4_max_perf =
- ACER_PREDATOR_V4_THERMAL_PROFILE_QUIET;
+ acer_predator_v4_max_perf = ACER_PREDATOR_V4_THERMAL_PROFILE_QUIET;
+ last_non_turbo_profile = ACER_PREDATOR_V4_THERMAL_PROFILE_QUIET;
}

if (test_bit(ACER_PREDATOR_V4_THERMAL_PROFILE_BALANCED, &supported_profiles)) {
set_bit(PLATFORM_PROFILE_BALANCED, choices);
- acer_predator_v4_max_perf =
- ACER_PREDATOR_V4_THERMAL_PROFILE_BALANCED;
+ acer_predator_v4_max_perf = ACER_PREDATOR_V4_THERMAL_PROFILE_BALANCED;
+ last_non_turbo_profile = ACER_PREDATOR_V4_THERMAL_PROFILE_BALANCED;
}

if (test_bit(ACER_PREDATOR_V4_THERMAL_PROFILE_PERFORMANCE, &supported_profiles)) {
set_bit(PLATFORM_PROFILE_BALANCED_PERFORMANCE, choices);
- acer_predator_v4_max_perf =
- ACER_PREDATOR_V4_THERMAL_PROFILE_PERFORMANCE;
+ acer_predator_v4_max_perf = ACER_PREDATOR_V4_THERMAL_PROFILE_PERFORMANCE;
+
+ /* We only use this profile as a fallback option in case no prior
+ * profile is supported.
+ */
+ if (last_non_turbo_profile < 0)
+ last_non_turbo_profile = ACER_PREDATOR_V4_THERMAL_PROFILE_PERFORMANCE;
}

if (test_bit(ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO, &supported_profiles)) {
set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
- acer_predator_v4_max_perf =
- ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO;
+ acer_predator_v4_max_perf = ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO;
+
+ /* We need to handle the hypothetical case where only the turbo profile
+ * is supported. In this case the turbo toggle will essentially be a
+ * no-op.
+ */
+ if (last_non_turbo_profile < 0)
+ last_non_turbo_profile = ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO;
}

return 0;
@@ -2080,10 +2091,6 @@ static int acer_platform_profile_setup(struct platform_device *device)
return PTR_ERR(platform_profile_device);

platform_profile_support = true;
-
- /* Set default non-turbo profile */
- last_non_turbo_profile =
- ACER_PREDATOR_V4_THERMAL_PROFILE_BALANCED;
}
return 0;
}
@@ -2101,6 +2108,10 @@ static int acer_thermal_profile_change(void)
if (cycle_gaming_thermal_profile) {
platform_profile_cycle();
} else {
+ /* Do nothing if no suitable platform profiles where found */
+ if (last_non_turbo_profile < 0)
+ return 0;
+
err = WMID_gaming_get_misc_setting(
ACER_WMID_MISC_SETTING_PLATFORM_PROFILE, &current_tp);
if (err)
--
2.39.5