Re: [PATCH 3/9] mips: dts: realtek: Add address to SoC node name

[Chris Packham]

On 20/01/2025 07:34, Sander Vanheule wrote:
> Although not strictly required by the simple-bus binding, add the bus
> offset to the node name to be consistent with other nodes. Also drop the
> node label as it is not referenced anywhere.
>
> Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>

Reviewed-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

> ---
>   arch/mips/boot/dts/realtek/rtl83xx.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/realtek/rtl83xx.dtsi b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
> index 03ddc61f7c9e..1039cb50c7da 100644
> --- a/arch/mips/boot/dts/realtek/rtl83xx.dtsi
> +++ b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
> @@ -16,7 +16,7 @@ cpuintc: cpuintc {
>   		interrupt-controller;
>   	};
>   
> -	soc: soc {
> +	soc@18000000 {
>   		compatible = "simple-bus";
>   		#address-cells = <1>;
>   		#size-cells = <1>;