[PATCH v4 0/4] RTL9300 MDIO driver
From: Chris Packham
Date: Sun Jan 19 2025 - 23:03:13 EST
This series adds a driver for the MDIO controller on the RTL9300 family
of devices. The controller is a little unique in that we can't access the SMI
interfaces directly. This means we need to use the hardware description from
the DTS to compute a mapping of switch port to mdio bus/address.
Chris Packham (4):
dt-bindings: net: Add Realtek MDIO controller
dt-bindings: mfd: Add MDIO interface to rtl9301-switch
mips: dts: realtek: Add MDIO controller
net: mdio: Add RTL9300 MDIO driver
.../bindings/mfd/realtek,rtl9301-switch.yaml | 24 +
.../bindings/net/realtek,rtl9301-mdio.yaml | 93 ++++
arch/mips/boot/dts/realtek/rtl930x.dtsi | 32 ++
drivers/net/mdio/Kconfig | 7 +
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/mdio-realtek-rtl9300.c | 417 ++++++++++++++++++
6 files changed, 574 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml
create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c
--
2.47.1