[PATCH v5 -next 00/11] Add PCIe support for bcm2712
From: Stanimir Varbanov
Date: Mon Jan 20 2025 - 08:02:03 EST
Here is v5 of the series which aims to add support for PCIe on bcm2712 SoC
used by RPi5. Previous v4 can be found at [1].
Based the series on linux-next because of vc4 gpu node in bcm2712.dtsi.
v4 -> v5 changes include:
- Addressed comments to interrupt-controller driver. (Thomas)
- Fixed DTB warnings broadcom/bcm2712-rpi-5-b.dtb.
- New patch in the series to fix missing of_node_put.
- New patch to make a softdep to a MIP MSI-X driver.
- Dropped the patch which adds MSI-X support in pcie-brcmstb driver,
and instead use DT dma-ranges to pass the needed information. (Jim)
For more detailed info check patches.
Comments are welcome!
~Stan
[1] https://patchwork.kernel.org/project/linux-pci/cover/20241025124515.14066-1-svarbanov@xxxxxxx/
Stanimir Varbanov (11):
dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
PCI: brcmstb: Reuse config structure
PCI: brcmstb: Expand inbound window size up to 64GB
PCI: brcmstb: Add bcm2712 support
PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
PCI: brcmstb: Adding a softdep to MIP MSI-X driver
PCI: brcmstb: Fix for missing of_node_put
arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
.../brcm,bcm2712-msix.yaml | 60 ++++
.../bindings/pci/brcm,stb-pcie.yaml | 6 +-
.../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 8 +
arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 147 +++++++++
drivers/irqchip/Kconfig | 16 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-bcm2712-mip.c | 292 ++++++++++++++++++
drivers/pci/controller/pcie-brcmstb.c | 147 ++++++---
8 files changed, 632 insertions(+), 45 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
create mode 100644 drivers/irqchip/irq-bcm2712-mip.c
--
2.47.0