[PATCH 5/5] arm64: dts: ti: k3-am62p-j722s-common-wakeup: Add ddr-pmctrl, canuart-wake

[Markus Schneider-Pargmann]

Within the wkup-conf register range there are ddr-pmctrl and
canuart-wake control registers. Add dedicated subnodes for these.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 6f32135f00a551cfea4cc896fc03147271eab9b7..3daade3f4ffcfa669f109200e86c3e11da34e70c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -39,6 +39,16 @@ usb1_phy_ctrl: syscon@4018 {
 			compatible = "ti,am62-usb-phy-ctrl", "syscon";
 			reg = <0x4018 0x4>;
 		};
+
+		ddr_pmctrl: syscon@80d0 {
+			compatible = "ti,am62-ddr-pmctrl", "syscon";
+			reg = <0x80d0 0x4>;
+		};
+
+		canuart_wake: syscon@18300 {
+			compatible = "ti,am62-canuart-wake", "syscon";
+			reg = <0x18300 0x44>;
+		};
 	};
 
 	wkup_uart0: serial@2b300000 {

-- 
2.47.1