Re: [PATCH v5 01/10] dt-bindings: media: Add amlogic,c3-mipi-csi2.yaml

[Jacopo Mondi]

Hi Keke, Krzysztof

On Fri, Dec 27, 2024 at 03:38:14PM +0800, Keke Li wrote:
> Hi Krzysztof
>
> Thanks for your reply
>
> On 2024/12/27 15:19, Krzysztof Kozlowski wrote:
> > [You don't often get email from krzysztof.kozlowski@xxxxxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > [ EXTERNAL EMAIL ]
> >
> > On 27/12/2024 08:09, Keke Li via B4 Relay wrote:
> > > From: Keke Li <keke.li@xxxxxxxxxxx>
> > >
> > > c3-mipi-csi2 is used to receive mipi data from image sensor.
> > >
> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> > > Signed-off-by: Keke Li <keke.li@xxxxxxxxxxx>
> > > ---
> > >   .../bindings/media/amlogic,c3-mipi-csi2.yaml       | 131 +++++++++++++++++++++
> > >   MAINTAINERS                                        |   6 +
> > >   2 files changed, 137 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
> > > new file mode 100644
> > > index 000000000000..76b68d1e7316
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
> > > @@ -0,0 +1,131 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-csi2.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Amlogic C3 MIPI CSI-2 receiver
> > > +
> > > +maintainers:
> > > +  - Keke Li <keke.li@xxxxxxxxxxx>
> > > +
> > > +description:
> > > +  MIPI CSI-2 receiver contains CSI-2 RX PHY and host controller.
> > > +  It receives the MIPI data from the image sensor and sends MIPI data
> > > +  to MIPI adapter.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - amlogic,c3-mipi-csi2
> > > +
> > > +  reg:
> > > +    maxItems: 3
> > > +
> > > +  reg-names:
> > > +    items:
> > > +      - const: aphy
> > > +      - const: dphy
> > > +      - const: host
> > > +
> > > +  power-domains:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 2
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: vapb
> > > +      - const: phy0
> > > +
> > > +  assigned-clocks: true
> > > +
> > > +  assigned-clock-rates: true
> > NAK
> >
> > Adding new properties *INVALIDATES REVIEW*. Otherwise you can sneak
> > whatever crap past reviewers.
> >
> > Drop all new properties and drop my review tag.
>
>
> OK, will drop all new properties and drop your review tag. Thanks
>

Krzysztof why should new properties added in-between two revisions be
dropped ?

I understand the "drop my tag if you make changes" but I don't get why
the newly added properties should be removed.

> >
> > Best regards,
> > Krzysztof
>