[PATCH] wifi: rtl8xxxu: retry firmware download on error

[Soeren Moch]

Occasionally there is an EPROTO error during firmware download.
This error is converted to EAGAIN in the download function.
But nobody tries again and so device probe fails.

Implement download retry to fix this.

Signed-off-by: Soeren Moch <smoch@xxxxxx>
---
Cc: Jes Sorensen <Jes.Sorensen@xxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxx>
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx

This error was observed (and fix tested) on a tbs2910 board [1]
with an embedded RTL8188EU (0bda:8179) device behind a USB hub.

[1] arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
---
 drivers/net/wireless/realtek/rtl8xxxu/core.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/core.c b/drivers/net/wireless/realtek/rtl8xxxu/core.c
index 7891c988dd5f..cd7d904eae62 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/core.c
@@ -4064,8 +4064,14 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	 */
 	rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);

-	ret = rtl8xxxu_download_firmware(priv);
-	dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
+	for (int retry = 5; retry ; retry--) {
+		ret = rtl8xxxu_download_firmware(priv);
+		dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
+		if (ret != -EAGAIN)
+			break;
+		if (retry)
+			dev_info(dev, "retry firmware download\n");
+	}
 	if (ret)
 		goto exit;
 	ret = rtl8xxxu_start_firmware(priv);
--
2.43.0