Re: [PATCH v2] net: phy: marvell-88q2xxx: Fix temperature measurement with reset-gpios

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (main)
by Paolo Abeni <pabeni@xxxxxxxxxx>:

On Sat, 18 Jan 2025 19:43:43 +0100 you wrote:
> When using temperature measurement on Marvell 88Q2XXX devices and the
> reset-gpios property is set in DT, the device does a hardware reset when
> interface is brought down and up again. That means that the content of
> the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that
> leads to permanent deactivation of the temperature measurement, because
> activation is done in mv88q2xxx_probe. To fix this move activation of
> temperature measurement to mv88q222x_config_init.
> 
> [...]

Here is the summary with links:
  - [v2] net: phy: marvell-88q2xxx: Fix temperature measurement with reset-gpios
    https://git.kernel.org/netdev/net/c/a197004cf3c2

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html