Re: [PATCH] iio: dac: ad3552r: clear reset status flag

[Jonathan Cameron]

On Wed, 22 Jan 2025 21:32:43 +0100
Angelo Dureghello <adureghello@xxxxxxxxxxxx> wrote:

> From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> 
> Clear reset status flag, to keep error status register
> clean after reset (ad3552r manual, rev B table 38).
> 
> Reset error flag was left to 1, so debugging registers, the
> "Error Status Register" was dirty (0x01). It is important
> to clear this bit, so if there is any reset event over normal
> working mode, it is possible to detect it.

Oddly short wrap. for commit descriptions wrap at 75 chars.

> 
> Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
Sounds like a fix, so does it want a fixes tag / go in quick
of is this only visible in debug related activities?

Jonathan

> ---
>  drivers/iio/dac/ad3552r.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
> index e7206af53af6..7944f5c1d264 100644
> --- a/drivers/iio/dac/ad3552r.c
> +++ b/drivers/iio/dac/ad3552r.c
> @@ -410,6 +410,12 @@ static int ad3552r_reset(struct ad3552r_desc *dac)
>  		return ret;
>  	}
>  
> +	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
> +	ret = ad3552r_write_reg(dac, AD3552R_REG_ADDR_ERR_STATUS,
> +				AD3552R_MASK_RESET_STATUS);
> +	if (ret)
> +		return ret;
> +
>  	return ad3552r_update_reg_field(dac,
>  					AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
>  					AD3552R_MASK_ADDR_ASCENSION,
> 
> ---
> base-commit: 07fa5fa97959422bbd663df056c9de0dec55e34f
> change-id: 20250122-wip-bl-ad3552r-clear-reset-330bdf2ff56e
> 
> Best regards,